Home › RESTRAINTS › SEAT BELT › REAR NO. 1 SEAT INNER BELT ASSEMBLY (for LH Side)

REAR NO. 1 SEAT INNER BELT ASSEMBLY (for LH Side) > REMOVAL

for Preparation Click here



1. REMOVE REAR CENTER SEAT ASSEMBLY


2. REMOVE REAR SEAT HEADREST ASSEMBLY


    B180411
  1. Press the headrest support button and pull up the headrest to its highest position as shown in the illustration.



    B180415
  1. Insert a finger or screwdriver into the hole to release the lock. Pull the headrest up as shown in the illustration to remove it.



3. REMOVE REAR SEAT TRACK BRACKET COVER


    B173775
  1. Disengage the 8 claws and remove the 2 rear seat track bracket covers.



4. REMOVE REAR OUTER TRACK BRACKET COVER


    B173776
  1. Disengage the 4 claws and remove the rear outer track bracket cover.



5. REMOVE REAR INNER TRACK BRACKET COVER


    B173777
  1. Disengage the 4 claws and remove the rear inner track bracket cover.



6. REMOVE REAR SEAT LEG SIDE COVER


    B173779
  1. Disengage the 3 claws.

  1. Disengage the clip and remove the rear seat leg side cover.



7. DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY (w/ Remote Folding Function)


  1. Pull down the adjuster's lock piece to release the lock as shown in the illustration.


    B180388E01



    B174594E01
  1. Using a screwdriver wrapped with protective tape, disengage the 2 claws as shown in the illustration.



  1. Lift up the seat track adjusting handle to the uppermost position and hold the handle in this position as shown in the illustration.


    B173770E01

  1. Using a screwdriver wrapped with protective tape, disconnect the rear No. 1 seat lock cable assembly as shown in the illustration.



  1. Using a screwdriver wrapped with protective tape, disconnect the rear seat reclining control cable as shown in the illustration.


    B180393E01

  1. Secure the rear seat reclining control cable with the carpet hole as shown in the illustration.



8. REMOVE REAR NO. 1 SEAT ASSEMBLY


    B173780
  1. Remove the 3 bolts on the rear side of the seat.



    B173778
  1. Remove the 2 bolts on the front side of the seat and the rear No. 1 seat assembly.

    NOTICE:
    Be careful not to damage the vehicle body.



9. REMOVE REAR SEAT RECLINING UPPER COVER


    B173783E01
  1. Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the rear seat reclining upper cover.



10. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE


    B196364
  1. Remove the 3 screws and the No. 1 reclining adjuster release handle.



11. REMOVE REAR SEAT CUSHION MOULDING LH


    B196365
  1. Remove the screw.

  1. Disengage the 5 claws.

  1. Disengage the guide and remove the rear seat cushion moulding LH.



12. REMOVE SEAT ADJUSTER COVER CAP


    B173786E01
  1. Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.



13. REMOVE REAR SEAT CUSHION MOULDING RH


    B173788
  1. Remove the screw.

  1. Disengage the 6 claws and remove the rear seat cushion moulding RH.



14. REMOVE REAR NO. 1 SEAT CUSHION COVER WITH PAD


    B180396
  1. Disengage the 2 hooks.



    B173795
  1. Disengage the 2 hooks.

  1. Remove the 2 hog rings.



    B196379
  1. Disengage the 3 buttons.



    B206101
  1. Disengage the 12 hooks.



    B173797
  1. Remove the 3 hog rings and the rear No. 1 seat cushion cover with pad.



15. REMOVE SEAT TRACK UPPER RAIL COVER


    B206104
  1. Remove the screw.

  1. Disengage the claw and remove the seat track upper rail cover.



16. REMOVE REAR SEAT RECLINING INNER COVER


    B206105
  1. Remove the screw.

  1. Disengage the guide and remove the rear seat reclining inner cover.



17. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY


    B170974
  1. Remove the bolt and the rear No. 1 seat inner belt assembly.