Home › RESTRAINTS › SEAT BELT › REAR NO. 2 SEAT INNER BELT ASSEMBLY

REAR NO. 2 SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY


    B170935
  1. Install the rear No. 2 seat inner belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the rear No. 2 seat inner belt assembly to overlap the protruding part of the rear No. 2 seat bracket.

    HINT:
    Use the same procedure for the RH side and LH side.



2. INSTALL REAR MAT


    B173249
  1. Install the rear mat.



3. INSTALL DECK FLOOR BOARD ASSEMBLY


    B178561
  1. Install the 2 nuts and the deck floor board assembly.

  1. Engage the 3 claws.



4. INSTALL DECK SIDE TRIM BOX LH


  1. Install the deck side trim box LH as shown in the illustration.


    B178555



    B173243E01
  1. Install the 2 deck side trim clip and the clips.



5. INSTALL REAR SEAT SIDE COVER LH


    B173607
  1. Engage the 2 clips and install the rear seat side cover LH.



6. INSTALL DECK SIDE TRIM BOX RH


  1. Install the deck side trim box RH as shown in the illustration.


    B178553



    B173247E01
  1. Install the 2 deck side trim clip and the clip.



7. INSTALL JACK CARRIER ASSEMBLY


    B178549
  1. Engage the 3 claws, and install the jack carrier assembly.



8. INSTALL JACK ASSEMBLY


    B173245
  1. Install the jack assembly.



9. INSTALL JACK CARRIER CUSHION


    B178550
  1. Install the jack carrier cushion.



10. INSTALL JACK CARRIER SUPPORT


11. INSTALL REAR SEAT SIDE COVER RH


    B173608
  1. Engage the 2 clips and install the rear seat side cover RH.



12. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)


13. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY


    B173244
  1. Engage the 2 guides and install the No. 2 deck board sub-assembly.



14. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY


    B173242
  1. Engage the 2 guides and install the No. 3 deck board sub-assembly.



15. INSTALL DECK BOARD ASSEMBLY


    B173240
  1. Install the deck board sub-assembly.