Home › RESTRAINTS › SEAT BELT › REAR NO. 1 SEAT OUTER BELT ASSEMBLY

REAR NO. 1 SEAT OUTER BELT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE REAR CENTER SEAT ASSEMBLY (for LH Side)


2. REMOVE REAR SEAT HEADREST ASSEMBLY


    B180411
  1. Press the headrest support button and pull up the headrest to its highest position as shown in the illustration.



    B180415
  1. Insert a finger or screwdriver into the hole to release the lock. Pull the headrest up as shown in the illustration to remove it.



3. REMOVE REAR SEAT TRACK BRACKET COVER


    B173775
  1. Disengage the 8 claws and remove the 2 rear seat track bracket covers.



4. REMOVE REAR OUTER TRACK BRACKET COVER


    B173776
  1. Disengage the 4 claws and remove the rear outer track bracket cover.



5. REMOVE REAR INNER TRACK BRACKET COVER


    B173777
  1. Disengage the 4 claws and remove the rear inner track bracket cover.



6. REMOVE REAR SEAT LEG SIDE COVER


    B173779
  1. Disengage the 3 claws.

  1. Disengage the clip and remove the rear seat leg side cover.



7. DISCONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY (w/ Remote Folding Function)


  1. Pull down the adjuster's lock piece to release the lock as shown in the illustration.


    B180388E01



    B174594E01
  1. Using a screwdriver wrapped with protective tape, disengage the 2 claws as shown in the illustration.



  1. Lift up the seat track adjusting handle to the uppermost position and hold the handle in this position as shown in the illustration.


    B173770E01

  1. Using a screwdriver wrapped with protective tape, disconnect the rear No. 1 seat lock cable assembly as shown in the illustration.



  1. Using a screwdriver wrapped with protective tape, disconnect the rear seat reclining control cable as shown in the illustration.


    B180393E01

  1. Secure the rear seat reclining control cable with the carpet hole as shown in the illustration.



8. REMOVE REAR NO. 1 SEAT ASSEMBLY


    B173780
  1. Remove the 3 bolts on the rear side of the seat.



    B173778
  1. Remove the 2 bolts on the front side of the seat and the rear No. 1 seat assembly.

    NOTICE:
    Be careful not to damage the vehicle body.



9. REMOVE REAR DOOR SCUFF PLATE


    B173228
  1. Disengage the 5 claws, 3 clips and guide, and remove the rear door scuff plate LH.



10. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP


11. REMOVE DECK BOARD ASSEMBLY


    B173240
  1. Remove the deck board assembly.



12. REMOVE NO. 3 DECK BOARD SUB-ASSEMBLY


    B173242
  1. Disengage the 2 guides and remove the No. 3 deck board sub-assembly.



13. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY


    B173244
  1. Disengage the 2 guides and remove the No. 2 deck board sub-assembly.



14. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
  1. Remove the tonneau cover assembly.



15. REMOVE REAR NO. 1 FLOOR BOARD (w/o Rear No. 2 Seat)


    B175152
  1. Disengage the 3 clips and the 3 guides, and remove the rear No. 1 floor board.



16. REMOVE REAR SEAT SIDE COVER LH (w/ Rear No. 2 Seat)


    B173607
  1. Disengage the 2 clips and remove the rear seat side cover LH.



17. REMOVE DECK SIDE TRIM BOX LH


    B173243E01
  1. Remove the 2 deck side trim clips and clip.



  1. Remove the deck side trim box LH as shown in the illustration.


    B178554



18. REMOVE REAR SEAT SIDE COVER RH (w/ Rear No. 2 Seat)


    B173608
  1. Disengage the 2 clips and remove the rear seat side cover RH.



19. REMOVE JACK CARRIER SUPPORT


20. REMOVE JACK CARRIER CUSHION


    B178550
  1. Remove the jack carrier cushion.



21. REMOVE JACK ASSEMBLY


    B173245
  1. Remove the jack assembly.



22. REMOVE JACK CARRIER ASSEMBLY


    B178548
  1. Using a screwdriver, disengage the 3 claws and remove the jack carrier assembly.



23. REMOVE DECK SIDE TRIM BOX RH


    B173247E01
  1. Remove the 2 deck side trim clips and clip.



  1. Remove the deck side trim box RH as shown in the illustration.


    B178552



24. REMOVE DECK FLOOR BOARD ASSEMBLY (w/o Rear No. 2 Seat)


    B178560
  1. Remove the 4 bolts and 4 nuts.

  1. Remove the deck floor board assembly.



25. REMOVE REAR MAT


    B173249
  1. Remove the rear mat.



26. REMOVE DECK FLOOR BOARD ASSEMBLY (w/ Rear No. 2 Seat)


    B178561
  1. Disengage the 3 claws.

  1. Remove the 2 nuts and the deck floor board assembly.



27. REMOVE REAR DECK FLOOR BOX (w/o Rear No. 2 Seat)


    B173679
  1. Remove the 2 nuts and the deck floor box.



28. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY (w/ Rear No. 2 Seat)


    B170935
  1. Remove the bolt and rear No. 2 seat inner belt assembly.

    HINT:
    Use the same procedure for the RH side and LH side.



29. DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY LH (w/ Rear No. 2 Seat)


    B170936
  1. Remove the bolt and disconnect the rear seat lap type belt assembly LH.



30. DISCONNECT REAR SEAT LAP TYPE BELT ASSEMBLY RH (w/ Rear No. 2 Seat)

HINT:
Use the same procedure for the RH side and the LH side.



31. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat)


    B205721
  1. Remove the 4 bolts and the rear No. 2 seat assembly.



32. REMOVE REAR FLOOR FINISH PLATE


    B173609
  1. Disengage the 4 clips and the 4 claws, and remove the rear floor finish plate.



33. REMOVE REAR SEAT SIDE GARNISH CAP (for RH Side without Rear Air Conditioning System)


    B173614
  1. Disengage the 8 claws and guide, and remove the rear seat side garnish cap.



34. REMOVE REAR SEAT SIDE GARNISH CAP (for RH Side with Rear Air Conditioning System)


    B173616
  1. Remove the screw.

  1. Disengage the 6 claws and the guide, and remove the rear seat side garnish cap.



35. REMOVE DECK SIDE TRIM COVER


    B173595E01
  1. Using a screwdriver, disengage the 2 claws and remove the deck side trim cover LH.

    HINT:
    Tape the screwdriver tip before use.



36. REMOVE DECK SIDE TRIM


    B173596
  1. Remove the bolt.



    B173623
  1. Disengage the 4 claws and the 3 guides, and remove the deck side trim LH as shown in the illustration.



37. REMOVE SIDE TRIM COVER LH (for LH Side without Rear Seat Entertainment System)


    B173597
  1. Disengage the 10 claws and remove the side trim cover LH.



38. REMOVE POWER OUTLET SOCKET BEZEL (for LH Side with Rear Seat Entertainment System)


    B173680
  1. Disengage the 4 claws.



    B173681
  1. Disconnect each connector and remove the power outlet socket bezel.



39. REMOVE SIDE TRIM COVER RH (for RH Side without Rear Automatic Air Conditioning System)


    B173610
  1. Disengage the 4 claws and remove the side trim cover RH.



40. REMOVE REAR ROOM TEMPERATURE SENSOR (for RH Side with Rear Automatic Air Conditioning System)


    E150364
  1. Disengage the 4 claws and remove the rear room temperature sensor.

  1. Disconnect the connector.



41. REMOVE REAR COMBINATION LIGHT SERVICE COVER LH (for LH Side)


    B173611E01
  1. Using a screwdriver, disengage the 6 claws and 2 guides, and remove the rear combination light service cover LH.

    HINT:
    Tape the screwdriver tip before use.



42. REMOVE REAR COMBINATION LIGHT SERVICE COVER RH (for RH Side)


    B173618E01
  1. Using a screwdriver, disengage the 6 claws and the 2 guides, and remove the rear combination light service cover RH.

    HINT:
    Tape the screwdriver tip before use.



43. REMOVE REAR POWER POINT SOCKET ASSEMBLY (for LH Side)
  1. Disconnect the connector.



    E151327
  1. Disengage the claw and remove the rear power point socket assembly.



44. REMOVE REAR POWER OUTLET SOCKET COVER (for LH Side)


    E151328
  1. Disengage the 2 claws and remove the rear power outlet socket cover.



45. REMOVE REAR DECK TRIM COVER (for LH Side without Remote Folding Function)


    B173602
  1. Disengage the 10 claws and remove the rear deck trim cover.



46. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL LH (for LH Side with Remote Folding Function)


    B173603
  1. Disengage the 5 claws and remove the reclining remote control bezel LH.



47. REMOVE ROPE HOOK ASSEMBLY


    B173598E01
  1. for Front Side:

    1. Using a screwdriver, disengage the 2 claws.

      HINT:
      Tape the screwdriver tip before use.

    2. Remove the bolt and the rope hook assembly.



    B173600E01
  1. for Rear Side:

    1. Using a screwdriver, disengage the 2 claws.

      HINT:
      Tape the screwdriver tip before use.

    2. Remove the bolt and rope hook assembly.



48. REMOVE NO. 2 DECK SIDE TRIM HOOK (for LH Side)


    B173612
  1. Remove the screw and the No. 2 deck side trim hook.



49. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side)

HINT:
Use the same procedure for the No. 1 luggage compartment trim hook and the No. 2 deck side trim hook.



50. REMOVE FRONT DECK SIDE TRIM COVER


    B173604E01
  1. Using a screwdriver, disengage the 4 claws and remove the 2 front deck side trim covers LH.

    HINT:
    Tape the screwdriver tip before use.



51. DISCONNECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY


    B170933
  1. Remove the bolt and disconnect the floor end of the rear No. 1 seat outer belt assembly.



52. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side)
  1. Remove the 2 bolts.

  1. Remove the 2 clips.



  1. Disengage the 7 claws and 4 clips, and remove the deck trim side panel assembly LH.


    B173613



53. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side)
  1. Remove the 3 bolts.

  1. Remove the 2 clips.



  1. Disengage the 7 claws and 4 clips, and remove the deck trim side panel assembly RH.


    B173622



54. REMOVE QUARTER PILLAR GARNISH


    B175156
  1. Disengage the 2 claws and 2 guides, and remove the No. 1 seat outer belt guide.



    B173263
  1. Disengage the 2 clips and the 2 guides, and remove the quarter pillar garnish LH.



55. REMOVE REAR NO. 1 SEAT OUTER BELT ASSEMBLY


    B170911
  1. Remove the bolt and disconnect the shoulder anchor of the rear No. 1 seat outer belt assembly.



    B170912
  1. Remove the 2 bolts and rear No. 1 seat outer belt assembly.