REAR NO. 2 SEAT OUTER BELT ASSEMBLY > INSTALLATION |
| 1. INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY |
If a new rear No. 2 seat outer belt assembly is used:
Install a new rear seat lap type belt assembly to a new rear No. 2 seat outer belt assembly.
![]() |
Install the rear No. 2 seat outer belt assembly with the 2 bolts.
![]() |
Connect the shoulder anchor of the rear No. 2 seat outer belt assembly with the bolt.
| 2. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY (w/o Power Back Door) |
w/ Rear No. 2 Seat:
![]() |
Engage the 2 guides and 5 clips.
Install the roof side inner garnish assembly LH with the bolt.
![]() |
Engage the 2 guides and the 2 claws, and install the No. 2 seat outer belt guide.
w/o Rear No. 2 Seat:
![]() |
Engage the 2 guides and 5 clips.
Install the roof side inner garnish assembly LH with the bolt.
| 3. INSTALL ROOF SIDE INNER GARNISH ASSEMBLY (w/ Power Back Door) |
w/ Rear No. 2 Seat:
![]() |
Engage the 2 guides and 5 clips.
Install the roof side inner garnish assembly LH with the bolt.
![]() |
Engage the 2 guides and the 2 claws, and install the No. 2 seat outer belt guide.
w/o Rear No. 2 Seat:
![]() |
Engage the 2 guides and 5 clips.
Install the roof side inner garnish assembly LH with the bolt.
| 4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH (for LH Side) |
Engage the 4 clips and the 7 claws.
Install the 2 clips.
Install the deck trim side panel assembly LH with the 2 bolts.

| 5. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH (for RH Side) |
Engage the 4 clips and the 7 claws.
Install the 2 clips.
Install the deck trim side panel assembly RH with the 3 bolts.

| 6. INSTALL FRONT DECK SIDE TRIM COVER |
![]() |
Engage the 4 claws and install the 2 front deck side trim covers LH.
| 7. INSTALL NO. 2 DECK SIDE TRIM HOOK (for LH Side) |
![]() |
Install the No. 2 deck side trim hook with the screw.
| 8. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for RH Side) |
| 9. INSTALL ROPE HOOK ASSEMBLY |
![]() |
for Front Side:
Install the rope hook assembly with the bolt.
Engage the 2 claws.
![]() |
for Rear Side:
Install the rope hook assembly with the bolt.
Engage the 2 claws.
| 10. INSTALL REAR DECK TRIM COVER (for LH Side without Remote Folding Function) |
![]() |
Engage the 10 claws and install the rear deck trim cover.
| 11. INSTALL RECLINING REMOTE CONTROL LEVER BEZEL LH (for LH Side with Remote Folding Function) |
![]() |
Engage the 5 claws and install the reclining remote control bezel LH.
| 12. INSTALL REAR POWER OUTLET SOCKET COVER (for LH Side) |
![]() |
Engage the 2 claws and install the rear power outlet socket cover.
| 13. INSTALL REAR POWER POINT SOCKET ASSEMBLY (for LH Side) |
![]() |
Engage the claw and install the rear power point socket assembly.
Connect the connector.
| 14. INSTALL REAR COMBINATION LIGHT SERVICE COVER LH (for LH Side) |
![]() |
Engage the 2 guides and 6 claws, and install the rear combination light service cover LH.
| 15. INSTALL REAR COMBINATION LIGHT SERVICE COVER RH (for RH Side) |
![]() |
Engage the 2 guides and 6 claws, and install the rear combination light service cover RH.
| 16. INSTALL SIDE TRIM COVER RH (for RH Side without Rear Automatic Air Conditioning System) |
![]() |
Engage the 4 claws, and install the side trim cover RH.
| 17. INSTALL REAR ROOM TEMPERATURE SENSOR (for RH Side with Rear Automatic Air Conditioning System) |
Connect the connector.
![]() |
Engage the 4 claws and install the rear room temperature sensor.
| 18. INSTALL SIDE TRIM COVER LH (for LH Side without Rear Seat Entertainment System) |
![]() |
Engage the 10 claws and install the side trim cover LH.
| 19. INSTALL POWER OUTLET SOCKET BEZEL (for LH Side with Rear Seat Entertainment System) |
![]() |
Connect each connector.
![]() |
Engage the 4 claws and install the power outlet socket bezel.
| 20. INSTALL DECK SIDE TRIM |
![]() |
Engage the 3 guides and 4 claws as shown in the illustration.
![]() |
Install the deck side trim LH with the bolt.
| 21. INSTALL DECK SIDE TRIM COVER |
![]() |
Engage the 2 claws and install the deck side trim cover LH.
| 22. INSTALL REAR SEAT SIDE GARNISH CAP (for RH Side without Rear Air Conditioning System) |
![]() |
Engage the guide and the 8 claws, and install the rear seat side garnish cap.
| 23. INSTALL REAR SEAT SIDE GARNISH CAP (for RH Side with Rear Air Conditioning System) |
![]() |
Engage the guide and the 6 claws.
Install the rear seat side garnish cap with the screw.
| 24. INSTALL REAR FLOOR FINISH PLATE |
![]() |
Engage the 4 clips and the 4 claws, and install the rear floor finish plate.
| 25. INSTALL REAR NO. 2 SEAT ASSEMBLY |
![]() |
Install the rear No. 2 seat assembly with the 4 bolts.
| 26. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY LH |
![]() |
Install the rear seat lap type belt assembly LH with the bolt.
| 27. INSTALL REAR SEAT LAP TYPE BELT ASSEMBLY RH |
Install the rear seat lap type belt assembly RH with the bolt.
| 28. INSTALL REAR NO. 2 SEAT INNER BELT ASSEMBLY |
![]() |
Install the rear No. 2 seat inner belt assembly with the bolt.
| 29. INSTALL DECK FLOOR BOARD ASSEMBLY |
![]() |
Install the 2 nuts and the deck floor board assembly.
Engage the 3 claws.
| 30. INSTALL REAR MAT |
![]() |
Install the rear mat.
| 31. INSTALL DECK SIDE TRIM BOX LH |
Install the deck side trim box LH as shown in the illustration.

![]() |
Install the 2 deck side trim clip and the clips.
| 32. INSTALL REAR SEAT SIDE COVER LH |
![]() |
Engage the 2 clips and install the rear seat side cover LH.
| 33. INSTALL DECK SIDE TRIM BOX RH |
Install the deck side trim box RH as shown in the illustration.

![]() |
Install the 2 deck side trim clip and the clip.
| 34. INSTALL JACK CARRIER ASSEMBLY |
![]() |
Engage the 3 claws, and install the jack carrier assembly.
| 35. INSTALL JACK ASSEMBLY |
![]() |
Install the jack assembly.
| 36. INSTALL JACK CARRIER CUSHION |
![]() |
Install the jack carrier cushion.
| 37. INSTALL JACK CARRIER SUPPORT |
| 38. INSTALL REAR SEAT SIDE COVER RH |
![]() |
Engage the 2 clips and install the rear seat side cover RH.
| 39. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) |
| 40. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY |
![]() |
Engage the 2 guides and install the No. 2 deck board sub-assembly.
| 41. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY |
![]() |
Engage the 2 guides and install the No. 3 deck board sub-assembly.
| 42. INSTALL DECK BOARD ASSEMBLY |
![]() |
Install the deck board sub-assembly.
| 43. CONNECT REAR DOOR OPENING TRIM WEATHERSTRIP |
| 44. INSTALL REAR DOOR SCUFF PLATE |
![]() |
Engage the guide, 3 clips and 5 claws, and install the rear door scuff plate LH.