Home › BODY › INSTRUMENT PANEL › INSTRUMENT PANEL SAFETY PAD

INSTRUMENT PANEL SAFETY PAD > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 HEATER TO REGISTER DUCT


    B168378
  1. Remove the 3 screws <F> and the No. 1 heater to register duct.



2. REMOVE NO. 4 HEATER TO REGISTER DUCT


    B168379
  1. Remove the 3 screws <F> and the No. 4 heater to register duct.



3. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT


    B168380
  1. Remove the screw <F> and the side No. 1 defroster nozzle duct.



4. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT


    B168381
  1. Remove the screw <F> and the side No. 2 defroster nozzle duct.



5. REMOVE DEFROSTER NOZZLE ASSEMBLY


    B173016
  1. Remove the clip.

  1. Remove the 3 screws <F> and the defroster nozzle assembly.



6. REMOVE CENTER HEATER TO REGISTER SUB DUCT


    B168382
  1. Remove the 2 screws <F> and the center heater to register sub duct.



7. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    B168383
  1. Remove the 3 screws <F> and the No. 1 instrument panel register assembly.



8. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    B168384
  1. Remove the 3 screws <F> and the No. 2 instrument panel register assembly.



9. REMOVE NAVIGATION ANTENNA ASSEMBLY


    E150590
  1. Remove the 2 screws and separate the navigation antenna assembly.



    E150591
  1. Disengage the 3 clamps and remove the navigation antenna assembly.



10. REMOVE ANTENNA CORD SUB-ASSEMBLY (for Pole Antenna Type)


  1. Disengage the 9 clamps and remove the antenna cord sub-assembly.


    E150566



11. REMOVE ANTENNA CORD SUB-ASSEMBLY (for Glass Antenna Type)


  1. Disengage the 9 clamps and remove the antenna cord sub-assembly.


    E150564



12. REMOVE NO. 4 INSTRUMENT PANEL WIRE


    B168385
  1. Disconnect the connector.

  1. Disengage the 5 clamps and remove the No. 4 instrument panel wire.



13. REMOVE COOLER SWITCH HOLE COVER (w/o Automatic Light Control System)


    B172998
  1. Disengage the 2 claws and remove the cooler switch hole cover.



14. REMOVE AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)
  1. Disconnect the connector.



    E150082
  1. Disengage the 2 claws and remove the automatic light control sensor.



15. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY


    C165104
  1. Remove the 2 screws.



    C165105
  1. Disengage the 5 hooks.



    C165106
  1. Disengage the 5 hooks and remove the front passenger airbag assembly from the instrument panel safety pad assembly as shown in the illustration.