INSTRUMENT PANEL SAFETY PAD > REASSEMBLY |
| 1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY |
![]() |
Engage the 5 hooks.
![]() |
Install the front passenger airbag assembly with the 5 hooks on the instrument panel.
![]() |
Install the 2 screws.
| 2. INSTALL COOLER SWITCH HOLE COVER (w/o Automatic Light Control System) |
![]() |
Engage the 2 claws and install the cooler switch hole cover.
| 3. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System) |
![]() |
Engage the 2 claws and install the automatic light control sensor.
Connect the connector.
| 4. INSTALL NO. 4 INSTRUMENT PANEL WIRE |
![]() |
Engage the 5 clamps.
Connect the connector and install the No. 4 instrument panel wire.
| 5. INSTALL ANTENNA CORD SUB-ASSEMBLY (for Pole Antenna Type) |
Engage the 9 clamps and install the antenna cord sub-assembly.

| 6. INSTALL ANTENNA CORD SUB-ASSEMBLY (for Glass Antenna Type) |
Engage the 9 clamps and install the antenna cord sub-assembly.

| 7. INSTALL NAVIGATION ANTENNA ASSEMBLY |
![]() |
Install the navigation antenna with the 2 screws.
![]() |
Engage the 3 clamps and install the navigation antenna assembly.
| 8. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() |
Install the No. 2 instrument panel register assembly with the 3 screws <F>.
| 9. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() |
Install the No. 1 instrument panel register assembly with the 3 screws <F>.
| 10. INSTALL CENTER HEATER TO REGISTER SUB DUCT |
![]() |
Install the center heater to register sub duct with the 2 screws <F>.
| 11. INSTALL DEFROSTER NOZZLE ASSEMBLY |
![]() |
Install the defroster nozzle assembly with the 3 screws <F> and clip.
| 12. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT |
![]() |
Install the side No. 2 defroster nozzle duct with the screw <F>.
| 13. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT |
![]() |
Install the side No. 1 defroster nozzle duct with the screw <F>.
| 14. INSTALL NO. 4 HEATER TO REGISTER DUCT |
![]() |
Install the No. 4 heater to register duct with the 3 screws <F>.
| 15. INSTALL NO. 1 HEATER TO REGISTER DUCT |
![]() |
Install the No. 1 heater to register duct with the 3 screws <F>.