REAR COMBINATION LIGHT ASSEMBLY > REASSEMBLY |
| 1. INSTALL REAR BUMPER SIDE SUPPORT |
![]() |
Engage the 2 claws and install the rear bumper side support.
| 2. INSTALL TAIL AND STOP LIGHT BULB |
Install the tail and stop light bulb to the tail and stop light socket.
![]() |
Turn the tail and stop light bulb and the tail and stop light socket in the direction indicated by the arrow and install them as a unit.
| 3. INSTALL REAR TURN SIGNAL LIGHT BULB |
Install the rear turn signal light bulb to the rear turn signal light socket.
![]() |
Turn the rear turn signal light bulb and the rear turn signal light socket in the direction indicated by the arrow and install them as a unit.
| 4. INSTALL BACK UP LIGHT BULB |
Install the back up light bulb to the back up light socket.
![]() |
Turn the back up light bulb and the back up light socket in the direction indicated by the arrow and install them as a unit.
| 5. INSTALL REAR COMBINATION LIGHT BODY GASKET |
![]() |
Install a new rear combination light body gasket.