IGNITION KEY CYLINDER LIGHT > INSTALLATION |
| 1. INSTALL KEY CYLINDER LIGHT ASSEMBLY (w/o Engine Immobiliser System) |
Align the key cylinder light assembly with the upper bracket. Tilt the amplifier slightly and slide it into the position as shown in the illustration.
![]() |
Push the key cylinder light assembly to install it to the upper bracket with the 2 claws.
| 2. INSTALL TRANSPONDER KEY AMPLIFIER (w/ Engine Immobiliser System) |
![]() |
Align the transponder key amplifier with the upper bracket. Tilt the amplifier slightly and slide it into the position as shown in the illustration.
Push the transponder key amplifier to install it to the upper bracket with the 2 claws.
| 3. INSTALL STEERING COLUMN COVER |
![]() |
Engage the claw and install the upper steering column cover.
![]() |
Engage the 2 claws and install the lower steering column cover.
![]() |
Turn the steering wheel assembly to the left and install the screw as shown in the illustration.
![]() |
Turn the steering wheel assembly to the right and install the screw as shown in the illustration.