Home › BODY ELECTRICAL › LIGHTING › GLOVE BOX LIGHT

GLOVE BOX LIGHT > INSTALLATION

for Preparation Click here



1. INSTALL NO. 2 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    E150080
  1. Engage the 2 claws and install the No. 2 interior illumination light assembly.



2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
  1. Connect each connector and clamp.



    B168370
  1. Engage the 4 claws and 3 clips.

  1. Install the lower instrument panel sub-assembly with the 2 bolts <B> and 3 screws <F>.



3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    B173000
  1. Engage the 2 guides.

  1. Engage the 3 claws and install the No. 2 instrument panel under cover sub-assembly.



4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:
Use the same procedure for the RH side and the LH side .



5. INSTALL FRONT DOOR SCUFF PLATE RH

HINT:
Use the same procedure for the RH side and the LH side .