CERTIFICATION ECU (w/ Smart Key System) > REMOVAL |
| 1. REMOVE FRONT DOOR SCUFF PLATE RH |
| 2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH |
| 3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
![]() |
Disengage the 3 claws.
Disengage the 2 guides and remove the No. 2 instrument panel under cover sub-assembly.
| 4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
![]() |
Remove the 2 bolts <B> and 3 screws <F>.
Disengage the 4 claws and 3 clips.
Disconnect each connector and clamp, and remove the lower instrument panel sub-assembly.
| 5. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY) |
![]() |
Disconnect the connectors.
Remove the 2 nuts and the certification ECU (smart key ECU assembly).