Home › SECURITIES › ENGINE IMMOBILISER › TRANSPONDER KEY AMPLIFIER (w/o Smart Key System)

TRANSPONDER KEY AMPLIFIER (w/o Smart Key System) > INSTALLATION

for Preparation Click here



1. INSTALL TRANSPONDER KEY AMPLIFIER


    C115570
  1. Align the transponder key amplifier with the upper bracket. Tilt the amplifier slightly and slide it into the position as shown in the illustration.

  1. Push the transponder key amplifier to install it to the upper bracket with the 2 claws.

    NOTICE:
    Do not push the amplifier with excessive force.



2. INSTALL STEERING COLUMN COVER


    C165716
  1. Engage the claw to install the upper steering column cover.



    C166128
  1. Engage the 2 claws to install the lower steering column cover.



    C165715
  1. Install the 2 screws.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }