Home › SECURITIES › ENGINE IMMOBILISER › TRANSPONDER KEY AMPLIFIER (w/o Smart Key System)

TRANSPONDER KEY AMPLIFIER (w/o Smart Key System) > REMOVAL

for Preparation Click here



1. REMOVE STEERING COLUMN COVER


    C165715
  1. Remove the 2 screws.



    C166128
  1. Disengage the 2 claws to remove the lower steering column cover.



    C165716
  1. Disengage the claw to remove the upper steering column cover.



2. REMOVE TRANSPONDER KEY AMPLIFIER


    C115569
  1. Using a screwdriver, widen the claws hanging onto the upper bracket by approximately 1.0 mm (0.039 in.).

  1. Pull out the transponder key amplifier with the claw open.

    NOTICE:
    Using excessive force may damage the case.