VOLTAGE INVERTER > INSTALLATION |
| 1. INSTALL VOLTAGE INVERTER ASSEMBLY |
![]() |
Install the voltage inverter assembly with the 2 bolts and nut.
Connect the connector.
| 2. INSTALL FRONT NO. 2 CONSOLE BOX INSERT |
![]() |
Engage the claw and 2 guides.
Install the front No. 2 console box insert with the 3 screws <F> and clip.
| 3. INSTALL FRONT NO. 1 CONSOLE BOX INSERT |
![]() |
Engage the claw and 2 guides.
Install the front No. 1 console box insert with the 3 screws <F> and 2 clips.
| 4. INSTALL CONSOLE BOX ASSEMBLY (w/o Rear Air Conditioning System) |
![]() |
Engage the 6 claws.
![]() |
Install the console box assembly with the 4 bolts and 2 screws.
| 5. INSTALL CONSOLE BOX ASSEMBLY (w/ Rear Air Conditioning System) |
![]() |
Engage the 6 claws.
Connect the connector.
![]() |
Install the console box assembly with the 4 bolts and 2 screws.
| 6. INSTALL LOWER REAR CONSOLE BOX |
Install the lower rear console box.
| 7. INSTALL NO. 2 CONSOLE BOX DUCT (w/o Rear Air Conditioning System) |
![]() |
Install the No. 2 console box duct as shown in the illustration.
| 8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Connect the connector.
Engage the 4 claws and 4 clips, and install the upper console panel sub-assembly.
| 9. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Key System) |
![]() |
Apply protective tape to the areas shown in the illustration.
Connect each connector.
Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.
| 10. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Key System) |
![]() |
Apply protective tape to the areas shown in the illustration.
Connect each connector.
Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.