Home › BODY › SEAT › REAR NO. 1 SEAT ASSEMBLY (for LH Side)

REAR NO. 1 SEAT ASSEMBLY (for LH Side) > INSTALLATION

for Preparation Click here



1. INSTALL REAR NO. 1 SEAT ASSEMBLY


    B173778
  1. Temporarily install the 2 bolts on the front side of the seat.



    B173780
  1. Temporarily install the 3 bolts on the rear side of the seat.

  1. Install the rear No. 1 seat assembly with the 5 bolts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }



2. CONNECT REAR NO. 1 SEAT LOCK CABLE ASSEMBLY (w/ Remote Folding Function)


  1. Remove the rear seat reclining control cable from the carpet hole.


    B180395E01

  1. Connect the rear seat reclining control cable as shown in the illustration.



  1. Connect the rear No. 1 seat lock cable assembly as shown in the illustration.


    B173771E01



    B174591
  1. Engage the 2 claws and connect the rear No. 1 seat lock cable assembly as shown in the illustration.

  1. Return the seatback to the upright position.



  1. Pull up the adjuster's lock piece to lock it as shown in the illustration.


    B180389E01

    NOTICE:
    When pressing the lock piece, make sure the adjuster's spring is not compress.



3. INSPECT REAR SEAT SLIDE ADJUSTER LOCK
  1. Check that the left and right adjusters lock simultaneously when sliding the seat.

  1. If the left and right adjusters do not lock simultaneously, adjust by loosening the bolts securing the seat.



4. INSTALL REAR SEAT LEG SIDE COVER


    B173779
  1. Engage the clip.

  1. Engage the 3 claws and install the rear seat leg side cover.



5. INSTALL REAR INNER TRACK BRACKET COVER


    B173777
  1. Engage the 4 claws and install the rear inner track bracket cover.



6. INSTALL REAR OUTER TRACK BRACKET COVER


    B173776
  1. Engage the 4 claws and install the rear outer track bracket cover.



7. INSTALL REAR SEAT TRACK BRACKET COVER


    B173775
  1. Engage the 8 claws and install the 2 rear seat track bracket covers.



8. INSTALL REAR SEAT HEADREST ASSEMBLY


    B176351
  1. Install the rear seat headrest assembly as shown in the illustration.



9. INSTALL REAR CENTER SEAT ASSEMBLY