Home › BODY › SEAT › REAR NO. 1 SEAT ASSEMBLY (for LH Side)

REAR NO. 1 SEAT ASSEMBLY (for LH Side) > DISASSEMBLY

for Preparation Click here



1. REMOVE REAR SEAT RECLINING UPPER COVER


    B173783E01
  1. Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the rear seat reclining upper cover.



2. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE


    B196364
  1. Remove the 3 screws and the No. 1 reclining adjuster release handle.



3. REMOVE REAR SEAT CUSHION MOULDING LH


    B196365
  1. Remove the screw.

  1. Disengage the 5 claws.

  1. Disengage the guide and remove the rear seat cushion moulding LH.



4. REMOVE SEAT ADJUSTER COVER CAP


    B173786E01
  1. Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.



5. REMOVE REAR SEAT CUSHION MOULDING RH


    B173788
  1. Remove the screw.

  1. Disengage the 6 claws and remove the rear seat cushion moulding RH.



6. REMOVE SEAT ADJUSTER COVER CAP


    B196371E01
  1. Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.



7. REMOVE SEAT ADJUSTER COVER CAP


    B196367E01
  1. Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.



8. REMOVE CENTER PROTECTOR COVER


    B196369
  1. Remove the screw.

  1. Disengage the claw and guide.



    B196370
  1. Remove the screw and disconnect the rear side seat band sub-assembly.

  1. Remove the center protector cover.



9. REMOVE REAR SEAT NO. 2 LEG SIDE COVER


    B206100
  1. Disengage the 2 claws and remove the rear seat No. 2 leg side cover.



10. REMOVE NO. 2 SEAT LEG COVER


    B196373
  1. Remove the 5 screws and the No. 2 seat leg cover.



11. REMOVE REAR SIDE SEAT BAND SUB-ASSEMBLY


    B196374
  1. Remove the rear side seat band sub-assembly.



12. REMOVE REAR SEAT 3 POINT TYPE COVER ASSEMBLY


    B196375
  1. Disengage the 2 claws and remove the rear seat 3 point type cover assembly.



13. REMOVE REAR SEAT CUSHION UNDER COVER


    B173790E01
  1. Using a screwdriver wrapped with protective tape, disengage the claw.

  1. Disengage the guide and remove the rear seat cushion under cover.



14. REMOVE NO. 2 REAR SEAT BEZEL COVER


    B173792
  1. Remove the screw.

  1. Disengage the 2 guides and remove the No. 2 rear seat bezel cover as shown in the illustration.



15. REMOVE REAR SEAT LOCK ASSEMBLY


    B196377
  1. Remove the 2 bolts and the rear seat lock assembly.



16. REMOVE REAR SEAT FRONT CUSHION MOULDING


    B196378
  1. Remove the screw and the rear seat front cushion moulding.



17. REMOVE REAR NO. 1 SEAT CUSHION COVER WITH PAD


    B180396
  1. Disengage the 2 hooks.



    B173795
  1. Disengage the 2 hooks.

  1. Remove the 2 hog rings.



    B196379
  1. Disengage the 3 buttons.



    B206101
  1. Disengage the 12 hooks.



    B173797
  1. Remove the 3 hog rings and the rear No. 1 seat cushion cover with pad.



18. REMOVE SEPARATE TYPE REAR NO. 1 SEAT CUSHION COVER


    B173798
  1. Remove the 11 hog rings and the separate type rear No. 1 seat cushion cover.



19. REMOVE NO. 1 REAR SEAT COVER (for LH Side)


    B206102
  1. Disengage the 4 hooks and remove the No. 1 rear seat cover.



20. REMOVE NO. 1 REAR SEAT COVER (for RH Side)


    B206103
  1. Disengage the 2 hooks and remove the No. 1 rear seat cover.



21. REMOVE NO. 1 REAR SEAT COVER (for Rear Side)


    B196382
  1. Disengage the 2 hooks and remove the No. 1 rear seat cover.



22. REMOVE REAR SEAT NO. 1 RECLINING COVER


    B206149
  1. Remove the screw.

  1. Disengage the claw.

  1. Disengage the 2 guides and remove the rear seat No. 1 reclining cover.



23. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    B206150
  1. Disengage the guide and remove the reclining adjuster inside cover LH.



24. REMOVE SEAT TRACK UPPER RAIL COVER


    B206104
  1. Remove the screw.

  1. Disengage the claw and remove the seat track upper rail cover.



25. REMOVE REAR SEAT RECLINING INNER COVER


    B206105
  1. Remove the screw.

  1. Disengage the guide and remove the rear seat reclining inner cover.



26. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY


    B170974
  1. Remove the bolt and the rear No. 1 seat inner belt assembly.



27. REMOVE NO. 1 SEAT ARMREST CAP


    B173800E01
  1. Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the No. 1 seat armrest cap.



28. REMOVE REAR SEAT ARMREST ASSEMBLY


    B173802
  1. Remove the bolt and the rear seat armrest assembly.



29. REMOVE TONNEAU COVER HOOK HOLDER


    B196386
  1. Remove the 2 screws and the 2 tonneau cover hook holders.



30. REMOVE REAR SEATBACK COVER


    B173805
  1. Disengage the 4 claws and remove the rear seatback cover.



31. REMOVE REAR SEAT LOCK STRIKER COVER


    B206106
  1. Using a screwdriver wrapped with protective tape, disengage the claw.

  1. Disengage the guide and remove the rear seat lock striker cover.



32. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY


    B206107
  1. Remove the 2 screws.

  1. Disengage the guide.



  1. Disconnect the rear seat lock control cable and remove the rear seat lock control lever sub-assembly as shown in the illustration.


    B173808



33. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    B170903
  1. Remove the bolt and disconnect the rear center seat outer belt assembly.



34. REMOVE REAR SEATBACK LOWER LOCK BEZEL


    B196390
  1. Remove the screw.

  1. Disengage the 4 claws and disconnect the rear center seat outer belt cover.



    B196391
  1. Disengage the snap and remove the rear seat track handle as shown in the illustration.



    B196393
  1. Remove the 2 screws and the rear seatback lower lock bezel.



35. REMOVE REAR SEATBACK LOCK ASSEMBLY


    B206108
  1. Remove the 2 bolts and the rear seatback lock assembly.



36. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY


    B206109
  1. Disengage the 19 claws as shown in the illustration.

  1. Disengage the 2 clips.

  1. Disengage the 2 guides and remove the rear seatback board carpet assembly.



37. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY LH


    B196396
  1. Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly LH.



38. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY RH


    B196397
  1. Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly RH.



39. REMOVE REAR NO. 1 SEATBACK COVER WITH PAD


    B173823
  1. Disengage the 2 hooks and the remove rear No. 1 seatback cover with pad.



40. REMOVE SEPARATE TYPE REAR NO. 1 SEATBACK COVER


    B173826
  1. Remove the 10 hog rings and the separate type rear No. 1 seatback cover.



41. REMOVE BELT SUPPORT PLATE


    B170939
  1. Disengage the 3 claws and remove the belt support plate.



42. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY


    B170904
  1. Remove the bolt, nut, and the rear center seat outer belt assembly.



43. REMOVE REAR NO. 1 SEAT SHOULDER BELT COVER


    B196398
  1. Disengage the claw.

  1. Disengage the guide and remove the rear No. 1 seat shoulder belt cover.



44. REMOVE REAR NO. 2 SEATBACK COVER


    B173828
  1. Remove the 2 screws.

  1. Disengage the claw and remove the rear No. 2 seatback cover.



45. REMOVE REAR SEAT CUSHION SIDE COVER


    B173829
  1. Remove the 2 screws.

  1. Disengage the claw and remove the rear seat cushion side cover.



46. REMOVE NO. 2 REAR SEAT COVER


    B206110
  1. Remove the No. 2 rear seat cover.



47. REMOVE NO. 1 REAR SEAT RECLINING CONTROL CABLE


    B206111
  1. Disengage the 6 control cable clamps and 2 clamps.

  1. Remove the clamp and the No. 1 rear seat reclining control cable.



48. REMOVE NO. 2 REAR SEAT RECLINING CONTROL CABLE


    B206112
  1. Disengage the 4 cable camps and rear seat hook.

  1. Disengage the rear seat hook.

  1. Disengage the claw and remove the No. 2 rear seat reclining control cable.



49. REMOVE REAR SEAT HOOK


    B196402
  1. Disengage the claw and remove the rear seat hook from the No. 2 rear seat reclining control cable.



50. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY


    B206113
  1. Using a T45 "TORX" socket, remove the 4 "TORX" bolts, 2 bushes and the rear seat cushion spring assembly.