REAR NO. 1 SEAT ASSEMBLY (for RH Side) > DISASSEMBLY |
| 1. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY |
![]() |
Remove the bolt and the rear No. 1 seat inner belt assembly.
| 2. REMOVE REAR SEAT RECLINING UPPER COVER |
![]() |
Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the rear seat reclining upper cover.
| 3. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE |
![]() |
Remove the 3 screws and remove the No. 1 reclining adjuster release handle.
| 4. REMOVE SEAT ADJUSTER COVER CAP |
![]() |
Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.
| 5. REMOVE REAR SEAT CUSHION MOULDING LH |
![]() |
Remove the 2 screws.
Disengage the 4 claws.
Disengage the guide and remove the rear seat cushion moulding LH.
| 6. REMOVE REAR SEAT CUSHION MOULDING RH |
![]() |
Remove the screw.
Disengage the 5 claws.
Disengage the guide and remove the rear seat cushion moulding RH.
| 7. REMOVE REAR NO. 1 SEAT CUSHION COVER WITH PAD |
![]() |
Disengage the 2 hooks.
![]() |
Disengage the 2 hooks.
Remove the 2 hog rings.
![]() |
Separate the 3 buttons.
![]() |
Disengage the 12 hooks.
![]() |
Remove the 4 hog rings and the rear No. 1 seat cushion cover with pad.
| 8. REMOVE NO. 1 REAR SEAT COVER LH |
![]() |
Disengage the 2 hooks and remove the No. 1 rear seat cover LH.
| 9. REMOVE NO. 1 REAR SEAT COVER RH |
![]() |
Disengage the 4 hooks and remove the No. 1 rear seat cover RH.
| 10. REMOVE NO. 2 REAR SEAT COVER |
![]() |
Disengage the 2 hooks and remove the No. 2 rear seat cover.
| 11. REMOVE SEPARATE TYPE REAR NO. 1 SEAT CUSHION COVER |
![]() |
Remove the 11 hog rings and the separate type rear No. 1 seat cushion cover.
| 12. REMOVE NO. 1 REAR SEAT ARMREST CAP |
![]() |
Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the No. 1 rear seat armrest cap.
| 13. REMOVE REAR SEAT ARMREST ASSEMBLY |
![]() |
Remove the bolt, washer, wave washer and the rear seat armrest assembly.
| 14. REMOVE TONNEAU COVER HOOK HOLDER |
![]() |
Remove the 2 screws and the 2 tonneau cover hook holders.
| 15. REMOVE REAR SEATBACK COVER |
![]() |
Disengage the 4 claws and remove the rear seatback cover.
| 16. REMOVE RECLINING REMOTE CONTROL LEVER KNOB (w/ Rear No. 2 Seat) |
![]() |
Remove the screw and the reclining remote control lever knob as shown in the illustration.
| 17. REMOVE REAR SEAT LOCK STRIKER COVER CAP (w/ Rear No. 2 Seat) |
![]() |
Using a screwdriver wrapped with protective tape, disengage the 4 claws and remove the 2 rear seat lock striker cover caps.
| 18. REMOVE NO. 1 REAR SEATBACK LOCK STRIKER COVER (w/ Rear No. 2 Seat) |
![]() |
Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the No. 1 rear seatback lock striker cover.
| 19. REMOVE NO. 1 REAR SEAT BEZEL COVER (w/ Rear No. 2 Seat) |
![]() |
Remove the 3 screws and the No. 1 rear seat bezel cover.
| 20. REMOVE REAR SEAT LOCK STRIKER COVER |
![]() |
Using a screwdriver wrapped with protective tape, disengage the claw.
Disengage the guide and remove the rear seat lock striker cover.
| 21. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY |
![]() |
Remove the 2 screws.
Disengage the guide.
Disconnect the rear seat lock control cable and remove the rear seat lock control lever sub-assembly as shown in the illustration.

| 22. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY (w/o Rear No. 2 Seat) |
![]() |
Disengage the 20 claws as shown in the illustration.
Disengage the 2 clips.
Disengage the 2 guides and remove the rear seatback board carpet assembly.
| 23. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY (w/ Rear No. 2 Seat) |
![]() |
Disengage the 18 claws as shown in the illustration.
Disengage the 2 clips.
Disengage the 2 guides and remove the rear seatback board carpet assembly.
| 24. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY LH |
![]() |
Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly LH.
| 25. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY RH |
![]() |
Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly RH.
| 26. REMOVE REAR NO. 1 SEATBACK COVER WITH PAD (w/o Rear No. 2 Seat) |
![]() |
Disengage the hook and remove the rear No. 1 seatback cover with pad.
| 27. REMOVE REAR NO. 1 SEATBACK COVER WITH PAD (w/ Rear No. 2 Seat) |
![]() |
Disengage the hook.
Remove the 2 hog rings and the rear No. 1 seatback cover with pad.
| 28. REMOVE SEPARATE TYPE REAR NO. 1 SEATBACK COVER |
![]() |
Remove the 10 hog rings and the separate type rear No. 1 seatback cover.
| 29. REMOVE REAR SEAT RECLINING INNER PROTECTOR |
![]() |
Disengage the claw and remove the rear seat reclining inner protector.
| 30. REMOVE REAR SEAT RECLINING INNER REAR COVER |
![]() |
Remove the screw.
Disengage the claw and remove the rear seat reclining inner rear cover.
| 31. REMOVE REAR SEAT RECLINING INNER FRONT COVER |
![]() |
Remove the screw and the rear seat reclining inner front cover.
| 32. REMOVE REAR SEATBACK INNER COVER |
![]() |
Remove the 2 screws.
Disengage the claw and remove the rear seatback inner cover.
| 33. REMOVE RECLINING ADJUSTER INSIDE COVER RH |
![]() |
Disengage the claw.
Disengage the guide and remove the reclining adjuster inside cover RH.
| 34. REMOVE NO. 1 REAR SEAT RECLINING COVER |
![]() |
Remove the screw.
Disengage the 2 guides and remove the No. 1 rear seat reclining cover.
| 35. REMOVE NO. 1 REAR SEAT COVER |
![]() |
Disengage the hook and remove the No. 1 rear seat cover.
| 36. REMOVE SEAT ADJUSTER CONTROL CABLE ASSEMBLY |
Disengage the hook and separate the seat adjuster control cable assembly with the rear seat hook.

Disconnect the 2 cable clamps.
Disengage the claw and remove the seat adjuster control cable assembly.
| 37. REMOVE REAR SEAT HOOK |
![]() |
Disengage the claw and remove the rear seat hook.
| 38. REMOVE SEAT TRACK CONTROL CABLE ASSEMBLY |
![]() |
Remove the 2 clamps.
Disconnect the 2 cable clamps and remove the seat track control cable assembly.
| 39. REMOVE REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY (w/o Rear No. 2 Seat) |
![]() |
Disconnect the 4 cable clamps and remove the rear seat reclining control cable sub-assembly.
| 40. REMOVE REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY (w/ Rear No. 2 Seat) |
Remove the clamp.

Disconnect the 6 cable clamps and remove the rear seat reclining control cable sub-assembly.
| 41. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY |
![]() |
Using a T45 "TORX" socket, remove the 4 "TORX" bolts, bushes, and the rear seat cushion spring assembly.
| 42. REMOVE REAR SEATBACK LOCK CONTROL LEVER SUB-ASSEMBLY |
![]() |
Remove the 2 nuts.
Disengage the guide and remove the rear seatback lock control lever sub-assembly.
| 43. REMOVE REAR SEATBACK STOPPER SUB-ASSEMBLY |
Disconnect the 4 cable clamps.

![]() |
Remove the nut and the rear seatback stopper sub-assembly.