Home › BODY › SEAT › REAR NO. 1 SEAT ASSEMBLY (for RH Side)

REAR NO. 1 SEAT ASSEMBLY (for RH Side) > REASSEMBLY

for Preparation Click here



1. INSTALL REAR SEATBACK STOPPER SUB-ASSEMBLY


    B204961
  1. Temporarily install the rear seatback stopper sub-assembly with the nut.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



  1. Connect the 4 cable clamps.


    B204956



2. INSTALL REAR SEATBACK LOCK CONTROL LEVER SUB-ASSEMBLY


    B204960
  1. Engage the guide.

  1. Install the rear seatback lock control lever sub-assembly with the 2 nuts.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



3. INSTALL REAR SEAT CUSHION SPRING ASSEMBLY


    B204959
  1. Using a T45 "TORX" socket, tighten the 4 "TORX" bolts, bushes and install the rear seat cushion spring assembly.

    Torque:
    21 N*m{ 214 kgf*cm , 16 ft.*lbf }



4. INSTALL REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY (w/o Rear No. 2 Seat)


    B206708
  1. Connect the 4 cable clamps to install the No. 1 rear seat reclining control cable sub-assembly.



5. INSTALL REAR SEAT RECLINING CONTROL CABLE SUB-ASSEMBLY (w/ Rear No. 2 Seat)


  1. Connect the 6 cable clamps to install the No. 1 rear seat reclining control cable sub-assembly.


    B204958

  1. Install the clamp.



6. INSTALL SEAT TRACK CONTROL CABLE ASSEMBLY


    B204957
  1. Connect the 2 cable clamps to install the seat track control cable assembly.

  1. Install the 2 clamps.



7. INSTALL REAR SEAT HOOK


    B204955
  1. Engage the claw to install the rear seat hook to the seat adjuster control cable assembly.



8. INSTALL SEAT ADJUSTER CONTROL CABLE ASSEMBLY


  1. Engage the claw.


    B204954

  1. Connect the 2 cable clamps to install the seat adjuster control cable assembly.

  1. Engage the hook to install the rear seat hook to the rear seat cushion spring assembly.



9. INSTALL NO. 1 REAR SEAT COVER


    B204953
  1. Engage the hook to install the No. 1 rear seat cover.



10. INSTALL NO. 1 REAR SEAT RECLINING COVER


    B204951
  1. Engage the 2 guides.

  1. Install the rear seat reclining cover with the screw.



11. INSTALL RECLINING ADJUSTER INSIDE COVER RH


    B204950
  1. Engage the guide.

  1. Engage the claw to install the reclining adjuster inside cover RH.



12. INSTALL REAR SEATBACK INNER COVER


    B204949
  1. Engage the claw.

  1. Install the rear seatback inner cover with the 2 screws.



13. INSTALL REAR SEAT RECLINING INNER FRONT COVER


    B204948
  1. Install the rear seat reclining inner front cover with the screw.



14. INSTALL REAR SEAT RECLINING INNER REAR COVER


    B204947
  1. Engage the claw.

  1. Install the rear seat reclining inner rear cover with the screw.



15. INSTALL REAR SEAT RECLINING INNER PROTECTOR


    B204946
  1. Engage the claw to install the rear seat reclining inner protector.



16. INSTALL SEPARATE TYPE REAR NO. 1 SEATBACK COVER


    B174509E01
  1. Using hog ring pliers, install the separate type rear No. 1 seatback cover with 10 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



17. INSTALL REAR NO. 1 SEATBACK COVER WITH PAD (w/o Rear No. 2 Seat)


    B174560
  1. Engage the hook to install the rear No. 1 seatback cover with pad.



18. INSTALL REAR NO. 1 SEATBACK COVER WITH PAD (w/ Rear No. 2 Seat)


    B174506E01
  1. Using hog ring pliers, install 2 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. Engage the hook to install the rear No. 1 seatback cover with pad.



19. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY RH


    B174599
  1. Engage the 2 claws to install the rear No. 1 seat headrest support assembly RH.



20. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY LH


    B174598
  1. Engage the 2 claws to install the rear No. 1 seat headrest support assembly LH.



21. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY (w/o Rear No. 2 Seat)


    B174563
  1. Engage the 2 guides.

  1. Engage the 2 clips.

  1. Engage the 20 claws to install the rear seatback board carpet assembly as shown in the illustration.



22. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY (w/ Rear No. 2 Seat)


    B174503
  1. Engage the 2 guides.

  1. Engage the 2 clips.

  1. Engage the 18 claws to install the rear seatback board carpet assembly as shown in the illustration.



23. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY


  1. Connect the rear seat lock control cable as shown in the illustration.


    B174502



    B174500
  1. Engage the guide.

  1. Install the rear seat lock control lever sub-assembly with the 2 screws.



24. INSTALL REAR SEAT LOCK STRIKER COVER


    B174499
  1. Engage the guide.

  1. Engage the claw to install the rear seat lock striker cover.



25. INSTALL NO. 1 REAR SEAT BEZEL COVER (w/ Rear No. 2 Seat)


    B174497
  1. Install the No. 1 rear seat bezel cover with the 3 screws.



26. INSTALL NO. 1 REAR SEATBACK LOCK STRIKER COVER (w/ Rear No. 2 Seat)


    B174496
  1. Engage the 2 craws to install the No. 1 rear seatback lock striker cover.



27. INSTALL REAR SEAT LOCK STRIKER COVER CAP (w/ Rear No. 2 Seat)


    B174494
  1. Engage the 4 craws to install the 2 rear seat lock striker cover caps.



28. INSTALL RECLINING REMOTE CONTROL LEVER KNOB (w/ Rear No. 2 Seat)


    B174492
  1. Install the remote control lever knob with the screw as shown in the illustration.



29. INSTALL REAR SEATBACK COVER


    B204945
  1. Engage the 4 claws to install the rear seatback cover.



30. INSTALL TONNEAU COVER HOOK HOLDER


    B204944
  1. Install the 2 tonneau cover hook holders with the 2 screws.



31. INSTALL REAR SEAT ARMREST ASSEMBLY


    B174488
  1. Install the rear seat armrest assembly with the bolt, washer and wave washer.

    Torque:
    33 N*m{ 337 kgf*cm , 24 ft.*lbf }



32. INSTALL NO. 1 REAR SEAT ARMREST CAP


    B174487
  1. Engage the 2 claws to install the No. 1 rear seat armrest cap.



33. INSTALL SEPARATE TYPE REAR NO. 1 SEAT CUSHION COVER


    B174485E01
  1. Using hog ring pliers, install the separate type rear No. 1 seat cushion cover with 11 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



34. INSTALL NO. 2 REAR SEAT COVER


    B204943
  1. Engage the 2 hooks to install the No. 2 rear seat cover.



35. INSTALL NO. 1 REAR SEAT COVER RH


    B204942
  1. Engage the 4 hooks to install the No. 1 rear seat cover RH.



36. INSTALL NO. 1 REAR SEAT COVER LH


    B204941
  1. Engage the 2 hooks to install the No. 1 rear seat cover LH.



37. INSTALL REAR NO. 1 SEAT CUSHION COVER WITH PAD


    B204940E01
  1. Using hog ring pliers, install 4 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.



    B204938
  1. Engage the 12 hooks.



    B204937
  1. Attach the 3 buttons.



    B204936E01
  1. Using hog ring pliers, install 2 new hog rings.

    NOTICE:
    1. Be careful not to damage the cover.
    2. When installing the hog rings, take care to minimize wrinkles as much as possible.

  1. Engage the 2 hooks.



    B204934
  1. Engage the 2 hooks to the rear No. 1 seat cushion cover with pad.



38. INSTALL REAR SEAT CUSHION MOULDING RH


    B204932
  1. Engage the guide.

  1. Engage the 5 claws.

  1. Install the rear seat cushion moulding RH with the screw.



39. INSTALL REAR SEAT CUSHION MOULDING LH


    B174477
  1. Engage the guide.

  1. Engage the 4 claws.

  1. Install the rear seat cushion moulding LH with the 2 screws.



40. INSTALL SEAT ADJUSTER COVER CAP


    B174476
  1. Engage the 2 claws to install the seat adjuster cover cap.



41. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE


    B174474
  1. Install the No. 1 reclining adjuster release handle with the 3 screws.



42. INSTALL REAR SEAT RECLINING UPPER COVER


    B174473
  1. Engage the 3 claws to install the rear seat reclining upper cover.



43. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY


    B170937
  1. Install the rear No. 1 seat inner belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }