REAR NO. 2 SEAT ASSEMBLY > DISASSEMBLY |
| 1. REMOVE RECLINING COVER PROTECTOR LH |
![]() |
Remove the 2 screws and the reclining cover protector LH.
| 2. REMOVE NO. 2 SEAT HINGE COVER LH |
![]() |
Remove the 2 screws and the No. 2 seat hinge cover LH.
| 3. REMOVE RECLINING COVER PROTECTOR RH |
![]() |
Remove the 2 screws and the reclining cover protector RH.
| 4. REMOVE NO. 2 SEAT HINGE COVER RH |
![]() |
Remove the 2 screws and the No. 2 seat hinge cover RH.
| 5. REMOVE REAR NO. 2 SEAT CUSHION COVER WITH PAD |
Disengage the 13 hooks.

Remove the 4 hog rings and the rear No. 2 seat cushion cover with pad.

| 6. REMOVE REAR NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY |
Remove the 14 hog rings and the rear No. 2 seat cushion cover sub-assembly.

| 7. REMOVE NO. 1 REAR SIDE SEAT BAND SUB-ASSEMBLY |
![]() |
Remove the 2 clips.
Separate the fastener and the rear side seat band sub-assembly.
| 8. REMOVE REAR SEAT LOCK STRIKER COVER |
![]() |
Using a screwdriver wrapped with protective tape, disengage the claw.
Disengage the 2 guides and remove the rear seat lock striker cover.
| 9. REMOVE REAR NO. 2 SEAT HANDLE |
![]() |
Remove the 2 screws.
![]() |
Remove the clamp.
Disconnect the 2 cable clamps and remove the rear No. 2 seat handle as shown in the illustration.

| 10. REMOVE NO. 2 SEATBACK BOARD SUB-ASSEMBLY |
Disengage the 7 clips.

Disengage the 3 hooks and remove the No. 2 seatback board sub-assembly.
| 11. REMOVE NO. 1 REAR SEAT COVER BEZEL |
![]() |
Remove the 2 screws.
Separate the hook and the No. 1 rear side seat band sub-assembly with No. 1 rear seat cover bezel.
![]() |
Remove the No. 1 rear seat cover bezel.
| 12. REMOVE REAR NO. 2 SEATBACK COVER WITH PAD |
Remove the 4 hog rings.

Disengage the 15 hooks.
![]() |
Disengage the 16 clips and remove the rear No. 2 seatback cover with pad.
| 13. REMOVE REAR NO. 2 SEATBACK COVER SUB-ASSEMBLY |
Remove the 18 hog rings and the rear No. 2 seatback cover sub-assembly.

| 14. REMOVE NO. 2 REAR SEAT RECLINING COVER LH |
![]() |
Remove the screw.
Disengage the guide and remove the No. 2 rear seat reclining cover LH.
| 15. REMOVE NO. 2 REAR SEAT RECLINING COVER RH |
![]() |
Remove the screw.
Disengage the guide and remove the No. 2 rear seat reclining cover RH.
| 16. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY LH |
![]() |
Remove the 2 screws and the rear No. 2 seat headrest cover LH.
![]() |
Disconnect the 2 cable clamps.
Remove the 3 nuts and the rear No. 2 seat headrest assembly LH.
| 17. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY RH |
![]() |
Remove the 2 screws and the rear No. 2 seat headrest cover RH.
![]() |
Disconnect the 2 cable clamps.
Remove the 3 nuts and the rear No. 2 seat headrest assembly RH.
| 18. REMOVE REAR SEATBACK EDGE PROTECTOR |
![]() |
Disengage the 8 claws and remove the 4 rear seatback edge protectors.
| 19. REMOVE NO. 2 REAR SEAT CUSHION LOCK CABLE ASSEMBLY LH |
![]() |
Remove the clamp.
Disconnect the 2 cable clamps and remove the No. 2 rear seat cushion lock cable assembly LH.
| 20. REMOVE NO. 1 REAR SEAT LOCK CABLE ASSEMBLY LH |
![]() |
Disconnect the 2 cable clamps and remove the No. 1 rear seat lock cable assembly LH.
| 21. REMOVE NO. 2 REAR SEAT CUSHION LOCK CABLE ASSEMBLY RH |
![]() |
Remove the clamp.
Disconnect the 2 cable clamps and remove the No. 2 rear seat cushion lock cable assembly RH.
| 22. REMOVE NO. 1 REAR SEAT LOCK CABLE ASSEMBLY RH |
![]() |
Disconnect the 2 cable clamps and remove the No. 1 rear seat lock cable assembly RH.
| 23. REMOVE NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY |
![]() |
Remove the 2 nuts, 2 bolts<A>, 2 spiral springs and the 2 E-rings.
Remove the 2 bolts <B> and the 2 bushes.
Remove the 2 bolts <C>, 2 washers and the No. 2 seat cushion frame sub-assembly.