POWER BACK DOOR CLOSER SWITCH > INSTALLATION |
| 1. INSTALL POWER BACK DOOR MAIN SWITCH |
![]() |
Engage the 4 claws and install the power back door main switch.
![]() |
Engage the clamp.
![]() |
Connect the connector.
| 2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY |
![]() |
Engage the 16 clips and install the back door trim panel assembly.
| 3. INSTALL ASSIST STRAP ASSEMBLY |
![]() |
Install the assist strap assembly with the bolt.
| 4. INSTALL ASSIST STRAP HOLE COVER |
![]() |
Engage the 2 guides and 2 claws, and install the assist strap hole cover.
| 5. INSTALL BACK DOOR LOCK COVER |
![]() |
Engage the 4 guides and 2 claws, and install the back door lock cover.
| 6. INSTALL BACK DOOR TRIM COVER LH |
![]() |
Engage the 2 clips and 2 claws, and install the back door trim cover LH.
| 7. CONNECT POWER BACK DOOR ROD |
![]() |
Install the back door stay plate and connect the power back door rod.
| 8. INSTALL BACK DOOR SERVICE HOLE COVER LH |
![]() |
Engage the 6 claws and install the back door service hole cover LH.
| 9. INSTALL BACK DOOR TRIM COVER RH |
![]() |
Engage the 2 clips and 2 claws, and install the back door trim cover RH.
| 10. INSTALL BACK WINDOW UPPER TRIM PANEL ASSEMBLY |
![]() |
Engage the 4 clips and 4 claws, and install the back window upper trim panel assembly.