Home › BODY › ENGINE HOOD / DOOR › POWER BACK DOOR WARNING BUZZER

POWER BACK DOOR WARNING BUZZER > INSTALLATION

for Preparation Click here



1. INSTALL POWER BACK DOOR WARNING BUZZER


    B172981
  1. Engage the clamp and install the power back door warning buzzer.

  1. Connect the connector.



2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY


    B174211
  1. Engage the 16 clips and install the back door trim panel assembly.



3. INSTALL ASSIST STRAP ASSEMBLY


    B177264
  1. Install the assist strap assembly with the bolt.



4. INSTALL ASSIST STRAP HOLE COVER


    B177265
  1. Engage the 2 guides and 2 claws, and install the assist strap hole cover.



5. INSTALL BACK DOOR LOCK COVER


    B173203
  1. Engage the 4 guides and 2 claws, and install the back door lock cover.



6. INSTALL BACK DOOR TRIM COVER LH


    B173202
  1. Engage the 2 clips and 2 claws, and install the back door trim cover LH.



7. CONNECT POWER BACK DOOR ROD


    B173201
  1. Install the back door stay plate and connect the power back door rod.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



8. INSTALL BACK DOOR SERVICE HOLE COVER LH


    B173200
  1. Engage the 6 claws and install the back door service hole cover LH.



9. INSTALL BACK DOOR TRIM COVER RH


    B174214
  1. Engage the 2 clips and 2 claws, and install the back door trim cover RH.



10. INSTALL BACK WINDOW UPPER TRIM PANEL ASSEMBLY


    B173198
  1. Engage the 4 clips and 4 claws, and install the back window upper trim panel assembly.