AIR CONDITIONING PANEL (for Manual Air Conditioning System) > REMOVAL |
| 1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY |
![]() |
Apply protective tape to the areas shown in the illustration.
Using a moulding remover, disengage the 10 claws and 8 clips starting from the upper part of the center instrument cluster finish panel assembly.
Disconnect each connector and remove the center instrument cluster finish panel assembly.
| 2. REMOVE HEATER CONTROL AND ACCESSORY ASSEMBLY |
![]() |
Disengage the 4 clips and remove the heater control and accessory assembly.
Disconnect the connector.