Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › FRONT BLOWER MOTOR

FRONT BLOWER MOTOR > REMOVAL

for Preparation Click here



1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    B172999
  1. Disengage the 3 claws.

  1. Disengage the 2 guides and remove the No. 2 instrument panel under cover sub-assembly.



2. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY


    E150335
  1. Disconnect the connector.

  1. Remove the 3 screws and the front blower motor sub-assembly.