Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER

RADIO RECEIVER > INSTALLATION

for Preparation Click here



1. INSTALL RADIO RECEIVER ASSEMBLY


2. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


    B170950
  1. Engage the 2 clips and install the integration control and panel assembly.



    E151584
  1. Engage the claw and connect the connector.



3. INSTALL NO. 2 RADIO BRACKET (w/o Multi-information Display)


    E151798
  1. Install the No. 2 radio bracket with the 4 screws.



4. INSTALL NO. 2 RADIO BRACKET (w/ Multi-information Display)


    E150553
  1. Install the No. 2 radio bracket with the 5 screws.



5. INSTALL NO. 1 RADIO BRACKET (w/o Multi-information Display)


    E151799
  1. Install the No. 1 radio bracket with the 4 screws.



    E150546
  1. Engage the claw and install the connector.



6. INSTALL NO. 1 RADIO BRACKET (w/ Multi-information Display)


    E150554
  1. Install the No. 1 radio bracket with the 5 screws.



    E150546
  1. Engage the claw and install the connector.



7. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET
  1. Connect each connector.



    E150552
  1. Engage the 4 clips.



    E150551
  1. Install the radio receiver assembly with bracket with the 4 bolts.



8. INSTALL HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System)
  1. Connect the connector.



    E150368
  1. Engage the 4 clips and install the heater control and accessory assembly.



9. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
  1. Connect the connector.



    E150367
  1. Engage the 4 clips and install the air conditioning control assembly.



10. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Key System)


    B184679E01
  1. Apply protective tape to the areas shown in the illustration.

  1. Connect each connector.

  1. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

    NOTICE:
    Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.



11. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Key System)


    B184681E01
  1. Apply protective tape to the areas shown in the illustration.

  1. Connect each connector.

  1. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

    NOTICE:
    Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.



12. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY


    B168369
  1. Engage the 2 claws and 5 clips, and install the center instrument panel register assembly.