Home › BODY ELECTRICAL › AUDIO / VISUAL › FRONT DOOR SPEAKER

FRONT DOOR SPEAKER > INSTALLATION

for Preparation Click here



1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY


    E150556
  1. Install the front No. 1 speaker assembly with the 4 bolts.

    NOTICE:
    Do not touch the cone part of the speaker.

  1. Connect the connector.



2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY
  1. Connect the connector.



    B172935
  1. Connect the front door lock remote control cable and front door inside locking cable to the front door inside handle sub-assembly.

  1. Engage the 2 clamps.



    B172933
  1. Engage the front door trim board with the 5 claws on the front door inner glass weatherstrip.

  1. Engage the 9 clips.



    B172932E01
  1. Install the 2 screws <B>.

  1. Install the screw <A> and front door trim board to the front door panel.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }



3. INSTALL COURTESY LIGHT ASSEMBLY
  1. Connect the connector.



    B172930
  1. Engage the claw and install the courtesy light assembly.



4. INSTALL ASSIST GRIP COVER


    B172925
  1. Engage the 4 claws and install the assist grip cover.



5. INSTALL FRONT ARMREST UPPER BASE PANEL
  1. Connect the connector.



    B172923
  1. Engage the 7 claws and clip and install the front armrest upper base panel.



6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    B172921
  1. Engage the 3 claws and install the front door inside handle bezel plug.



7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH


    B172931
  1. Engage the clip and claw, and install the front door lower frame bracket garnish.