Home › BODY ELECTRICAL › AUDIO / VISUAL › REAR DOOR SPEAKER

REAR DOOR SPEAKER > INSTALLATION

for Preparation Click here



1. INSTALL REAR SPEAKER ASSEMBLY


    E150558
  1. Install the rear speaker assembly with the 3 bolts.

    NOTICE:
    Do not touch the cone part of the speaker.

  1. Connect the connector.



2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


    B173158
  1. Connect the rear door lock remote control cable and rear door inside locking cable to the rear door inside handle sub-assembly.

  1. Engage the 2 clamps.



    B173156
  1. Engage the rear door trim board with the 5 claws on the rear door inner glass weatherstrip.

  1. Engage the 9 clips and install the rear door trim board to the rear door panel.



    B173155E01
  1. Install the 2 screws <B>.

  1. Install the screw <A>.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }



3. INSTALL DOOR ASSIST GRIP COVER


    B172990
  1. Engage the 4 claws and install the door assist grip cover.



4. INSTALL REAR DOOR ARMREST UPPER BASE PANEL
  1. Connect the connector.



    B172988
  1. Engage the 6 claws and 2 clips and install the rear door armrest upper base panel.



5. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG


    B172921
  1. Engage the 3 claws to install the rear door inside handle bezel plug.