BACK DOOR SPEAKER > ON-VEHICLE INSPECTION |
| 1. INSPECT REAR STEREO COMPONENT SPEAKER |
Check the speaker installation.
Visually check the speaker.
Speaker resistance check
![]() |
Disconnect the rear stereo component speaker connector.
Measure the resistance between the terminals of the speaker.
| Tester connection | Condition | Specified condition |
| 1 (WF+) - 2 (WF-) | Always | 1.6 to 2.4 Ω |
| 4 (WF+) - 3 (WF-) | Always | 1.6 to 2.4 Ω |