Home › BODY ELECTRICAL › AUDIO / VISUAL › STEREO JACK ADAPTER ASSEMBLY

STEREO JACK ADAPTER ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL STEREO JACK ADAPTER ASSEMBLY (w/o Seat Heater System)


    E151119
  1. Engage the 2 claws and install the stereo jack adapter assembly.



2. INSTALL STEREO JACK ADAPTER ASSEMBLY (w/ Seat Heater System)


    E151121
  1. Engage the 2 claws and install the stereo jack adapter assembly.



3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Key System)


    B184679E01
  1. Apply protective tape to the areas shown in the illustration.

  1. Connect each connector.

  1. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

    NOTICE:
    Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.



4. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Key System)


    B184681E01
  1. Apply protective tape to the areas shown in the illustration.

  1. Connect each connector.

  1. Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.

    NOTICE:
    Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.