AMBIENT TEMPERATURE SENSOR > REMOVAL |
| 1. REMOVE COOL AIR INTAKE DUCT SEAL |
![]() |
Remove the 11 clips and cool air intake duct seal.
| 2. REMOVE RADIATOR GRILLE |
![]() |
Put protective tape around the radiator grille.
![]() |
Remove the 2 bolts and 4 clips.
![]() |
Disengage the 6 claws and 4 guides, and remove the radiator grille.
| 3. REMOVE AMBIENT TEMPERATURE SENSOR |
![]() |
Disconnect the connector.
Disengage the clamp and remove the ambient temperature sensor.