Home › BODY › WINDSHIELD / WINDOWGLASS › GLASS HATCH OPENER SWITCH

GLASS HATCH OPENER SWITCH > INSPECTION

for Preparation Click here



1. INSPECT GLASS HATCH OPENER SWITCH ASSEMBLY


    B172580E01
  1. Measure the resistance according to the value(s) in the table below.
    Standard resistance 
    Tester Connection
    Switch Condition
    Specified Condition
    1 - 2
    Pushed
    10 kΩ or higher
    Not pushed
    Below 1 Ω
    If the result is not as specified, replace the glass hatch opener switch assembly.