REAR CENTER SEAT ASSEMBLY > DISASSEMBLY |
| 1. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY |
| 2. REMOVE REAR SEATBACK LOCK COVER CAP |
![]() |
Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the rear seatback lock cover cap.
| 3. REMOVE REAR SEAT LEG REST LOCK COVER |
![]() |
Disengage the 3 claws and remove the rear seat leg rest lock cover.
| 4. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY |
![]() |
Remove the 2 screws.
Disengage the 3 clips and remove the rear seatback board sub-assembly.
| 5. REMOVE REAR CENTER SEAT HEADREST SUPPORT ASSEMBLY LH |
![]() |
Disengage the 2 claws and remove the rear center seat headrest support assembly LH.
| 6. REMOVE REAR CENTER SEAT HEADREST SUPPORT ASSEMBLY RH |
![]() |
Disengage the 2 claws and remove the rear center seat headrest support assembly RH.
| 7. REMOVE CENTER SEATBACK COVER SUB-ASSEMBLY |
![]() |
Disengage the 9 hooks.
Disengage the 2 clips.
![]() |
Remove the 4 clips and the center seatback cover sub-assembly.
| 8. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY |
![]() |
Remove the 4 screws and the No. 2 seatback cover sub-assembly.
| 9. REMOVE REAR CENTER SEATBACK PAD |
![]() |
Remove the rear center seatback pad.
| 10. REMOVE REAR SEAT HINGE COVER LH |
![]() |
Remove the 2 screws.
Disengage the claw and the guide to remove the rear seat hinge cover LH.
| 11. REMOVE REAR SEAT HINGE COVER RH |
![]() |
Remove the 2 screws.
Disengage the claw and the guide to remove the rear seat hinge cover RH.
| 12. REMOVE REAR CENTER SEATBACK FRAME ASSEMBLY |
![]() |
Disconnect the 3 cable clamps.
Using a T45 "TORX" socket, remove the 2 "TORX" bolts and the rear center seatback frame assembly.
![]() |
Remove the bush.
| 13. REMOVE REAR SEATBACK PROTECTOR |
![]() |
Remove the screw.
Disengage the guide and remove the rear seatback protector.
| 14. REMOVE REAR SEAT TURN CABLE ASSEMBLY |
![]() |
Remove the nut.
Disengage the guide and remove the rear seat turn cable assembly.
| 15. REMOVE CENTER SEAT CUSHION COVER SUB-ASSEMBLY |
![]() |
Disengage the 15 claws and remove the center seat cushion cover sub-assembly.
| 16. REMOVE CENTER SEAT CUSHION PAD |
![]() |
Remove the center seat cushion pad.
| 17. REMOVE REAR SEATBACK LOCK STRIKER PROTECTOR |
![]() |
Remove the rear seatback lock striker protector.
| 18. REMOVE REAR SEAT LOCK STRIKER |
![]() |
Using a T45 "TORX" socket, remove the rear seat lock striker.
| 19. REMOVE NO. 2 REAR SEAT CUSHION COVER SUB-ASSEMBLY |
![]() |
Remove the 3 screws and the No. 2 rear seat cushion cover sub-assembly.
| 20. REMOVE REAR SEAT CUSHION HINGE CAP |
![]() |
Disengage the 2 claws and remove the rear seat cushion hinge cap.