REAR CENTER SEAT ASSEMBLY > REASSEMBLY |
| 1. INSTALL REAR SEAT CUSHION HINGE CAP |
![]() |
Engage the 2 claws to install the rear seat cushion hinge cap.
| 2. INSTALL NO. 2 REAR SEAT CUSHION COVER SUB-ASSEMBLY |
![]() |
Install the No. 2 rear seat cushion cover sub-assembly with the 3 screws.
| 3. INSTALL REAR SEAT LOCK STRIKER |
![]() |
Using a T45 "TORX" socket, install the rear seat lock striker.
| 4. INSTALL REAR SEATBACK LOCK STRIKER PROTECTOR |
![]() |
Install the rear seatback lock striker protector.
| 5. INSTALL CENTER SEAT CUSHION PAD |
![]() |
Install the center seat cushion pad.
| 6. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY |
![]() |
Engage the 15 claws to install the center seat cushion cover sub-assembly.
| 7. INSTALL REAR SEAT TURN CABLE ASSEMBLY |
![]() |
Insert the guide.
Install the rear seat turn cable assembly with the nut.
| 8. INSTALL REAR SEATBACK PROTECTOR |
![]() |
Engage the guide.
Install the rear seatback protector with the screw.
| 9. INSTALL REAR CENTER SEATBACK FRAME ASSEMBLY |
![]() |
Install the bush.
![]() |
Using a T45 "TORX" socket, install the 2 "TORX" bolts to the rear center seatback frame assembly.
Engage the 3 cable clamps to install the cable.
| 10. INSTALL REAR SEAT HINGE COVER RH |
![]() |
Engage the guide and the claw.
Install the rear seat hinge cover RH with the 2 screws.
| 11. INSTALL REAR SEAT HINGE COVER LH |
![]() |
Engage the guide and the claw.
Install the rear seat hinge cover LH with the 2 screws.
| 12. INSTALL REAR CENTER SEATBACK PAD |
![]() |
Install the center seatback pad to the No. 1 seat cushion frame sub-assembly.
| 13. INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY |
![]() |
Install the No. 2 seatback cover sub-assembly with the 4 screws.
| 14. INSTALL CENTER SEATBACK COVER SUB-ASSEMBLY |
![]() |
Temporarily install the center seatback cover sub-assembly with the 4 clips.
![]() |
Install the 2 clips.
Engage the 9 hooks to install the center seatback cover sub-assembly.
| 15. INSTALL REAR CENTER SEAT HEADREST SUPPORT ASSEMBLY RH |
![]() |
Engage the 2 claws to install the rear center seat headrest support assembly RH.
| 16. INSTALL REAR CENTER SEAT HEADREST SUPPORT ASSEMBLY LH |
![]() |
Engage the 2 claws to install the rear center seat headrest support assembly LH.
| 17. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY |
![]() |
Engage the 3 clips.
Install the rear seatback board sub-assembly with the 2 screws.
| 18. INSTALL REAR SEAT LEG REST LOCK COVER |
![]() |
Engage the 3 claws to install the rear seat leg rest lock cover.
| 19. INSTALL REAR SEATBACK LOCK COVER CAP |
![]() |
Engage the 2 claws to install the rear seatback lock cover cap.
| 20. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY |