Home › BODY › EXTERIOR › NAME PLATE

NAME PLATE > INSTALLATION

for Preparation Click here


HINT:
When installing a new name plate and emblem, heat the vehicle body, name plate and emblem using a heat light.

Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate, Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, name plate or emblem excessively.



1. INSTALL SYMBOL EMBLEM
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new symbol emblem.

    1. Using a heat light, heat the vehicle body and a new symbol emblem.

    2. Remove the release paper from the symbol emblem.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    3. Install the symbol emblem as shown in the illustration.


      B172810E01



2. INSTALL NO. 2 BACK DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    3. Install the name plate as shown in the illustration.


      B172817E01

      Standard measurement:
      Dimension
      Measurement
      A
      96.9 mm (3.815 in.)
      B
      218.9 mm (8.618 in.)
      C
      277.8 mm (10.937 in.)
      D
      277.0 mm (10.905 in.)



3. INSTALL NO. 4 BACK DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    3. Install the name plate as shown in the illustration.


      B172818E01

      Standard measurement:
      Dimension
      Measurement
      A
      105.1 mm (4.138 in.)
      B
      166.0 mm (6.535 in.)
      C
      264.5 mm (10.413 in.)
      D
      262.3 mm (10.327 in.)



4. INSTALL BACK DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    3. Install the name plate as shown in the illustration.


      B172820E01

      Standard measurement:
      Dimension
      Measurement
      A
      37.5 mm (1.476 in.)
      B
      141.3 mm (5.563 in.)
      C
      69.5 mm (2.736 in.)
      D
      65.4 mm (2.575 in.)



5. INSTALL FRONT DOOR NAME PLATE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove any double-sided tape from the vehicle body.

    3. Wipe off any tape adhesive residue with cleaner.



  1. Install a new name plate.

    1. Using a heat light, heat the vehicle body and a new name plate.

    2. Remove the release paper from the name plate.

      HINT:
      After removing the release paper, keep the exposed adhesive free from foreign matter.



    3. Install the name plate as shown in the illustration.
      for SPORT plate on LH side:


      B172811E01

      Standard measurement:
      Dimension
      Measurement
      A
      103.9 mm (4.091 in.)
      B
      255.9 mm (10.075 in.)
      C
      173.3 mm (6.823 in.)
      D
      174.7 mm (6.878 in.)

      for SPORT plate on RH side:


      B172812E01

      Standard measurement:
      Dimension
      Measurement
      A
      121.1 mm (4.768 in.)
      B
      273.0 mm (10.748 in.)
      C
      173.4 mm (6.827 in.)
      D
      174.9 mm (6.886 in.)

      for LIMITED plate on LH side:


      B172813E01

      Standard measurement:
      Dimension
      Measurement
      A
      100.6 mm (3.961 in.)
      B
      276.3 mm (10.878 in.)
      C
      173.3 mm (6.823 in.)
      D
      174.9 mm (6.886 in.)

      for LIMITED plate on RH side:


      B172814E01

      Standard measurement:
      Dimension
      Measurement
      A
      100.9 mm (3.972 in.)
      B
      276.3 mm (10.878 in.)
      C
      173.3 mm (6.823 in.)
      D
      174.9 mm (6.886 in.)