Home › BODY › EXTERIOR › NAME PLATE

NAME PLATE > REMOVAL

for Preparation Click here


HINT:
When removing the name plate and emblem heat the vehicle body, name plate and emblem using a heat light.

Heating temperature:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Name Plate, Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body, name plate or emblem excessively.



1. REMOVE SYMBOL EMBLEM


    B172806E01
  1. Put protective tape around the symbol emblem.

  1. Using a moulding remover, peel off the double-sided tape and remove the symbol emblem.

    NOTICE:
    Be careful not to damage the vehicle body.



2. REMOVE NO. 2 BACK DOOR NAME PLATE


    B172807E01
  1. Put protective tape around the name plate.

  1. Using a moulding remover, peel off the double-sided tape and remove the name plate.

    NOTICE:
    Be careful not to damage the vehicle body.



3. REMOVE NO. 4 BACK DOOR NAME PLATE


    B172808E01
  1. Put protective tape around the name plate.

  1. Using a moulding remover, peel off the double-sided tape and remove the name plate.

    NOTICE:
    Be careful not to damage the vehicle body.



4. REMOVE BACK DOOR NAME PLATE


    B172809E01
  1. Put protective tape around the name plate.

  1. Using a moulding remover, peel off the double-sided tape and remove the name plate.

    NOTICE:
    Be careful not to damage the vehicle body.



5. REMOVE FRONT DOOR NAME PLATE


    B172805E01
  1. Put protective tape around the name plate.

  1. Using a moulding remover, peel off the double-sided tape and remove the name plate.

    NOTICE:
    Be careful not to damage the vehicle body.