DTC B1610/13 Front Airbag Sensor RH Malfunction |
| DTC No. | DTC Detection Condition | Trouble Area |
| B1610/13 |
|
|

| 1.CHECK FRONT AIRBAG SENSOR RH |
![]() |
Turn the ignition switch off.
Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.
Interchange the front airbag sensor LH with RH and connect the connectors to them.
Connect the negative (-) terminal cable to the battery.
Turn the ignition switch on (IG), and wait for at least 60 seconds.
Clear the DTCs stored in the memory (Click here).
Turn the ignition switch off.
Turn the ignition switch on (IG), and wait for at least 60 seconds.
Check for DTCs (Click here).
| Result | Proceed to |
| DTC B1610/13 or B1615/14 is not output | A |
| DTC B1610/13 is output | B |
| DTC B1615/14 is output | C |
|
| ||||
|
| ||||
| A | ||
| ||