Home › ENGINE › 2GR-FE ENGINE CONTROL SYSTEM › VACUUM SWITCHING VALVE (for Engine Mounting)

VACUUM SWITCHING VALVE (for Engine Mounting) > INSTALLATION

for Preparation Click here



1. INSTALL DUTY VACUUM SWITCHING VALVE


    A171735
  1. Connect the vacuum hose sub-assembly to the duty vacuum switching valve.



    A171734
  1. Connect the hose to the duty vacuum switching valve.



    A171733
  1. Install the duty vacuum switching valve with a bolt.

    Torque:
    4.0 N*m{ 41 kgf*cm , 35 in.*lbf }



    A171732
  1. Connect the duty vacuum switching valve connector and clamp.



2. INSTALL VACUUM HOSE SUB-ASSEMBLY


    A172484
  1. Install the clamp of the vacuum hose sub-assembly to the front engine mounting insulator assembly.



    A171740
  1. Install the 2 clamps.



    A171739
  1. Connect the vacuum hose sub-assembly to the air cleaner cap sub-assembly and vacuum switching valve.



3. INSTALL NO. 1 ENGINE UNDER COVER


    A171855
  1. Install the No. 1 engine under cover with the 6 bolts and 2 clips.



4. INSTALL ENGINE UNDER COVER ASSEMBLY


    A171850
  1. Install the engine under cover assembly with the 4 bolts and 5 clips.



    A171849
  1. Install the engine under cover assembly RR with the 2 bolts.