Home › BODY › SLIDING ROOF › SLIDING ROOF SYSTEM

SLIDING ROOF SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



CHECK DTC
  1. Connect Techstream to the DLC3.

  2. Turn the ignition switch on (IG).

  3. Read the DTCs by following the directions on the tester screen.

    HINT:
    Refer to the Techstream operator's manual for further details.


CLEAR DTC
  1. Connect Techstream to the DLC3.

  2. Turn the ignition switch on (IG).

  3. Erase the DTCs by following the directions on the tester screen.

    HINT:
    Refer to the Techstream operator's manual for further details.