Home › BRAKE › BRAKE CONTROL › VEHICLE STABILITY CONTROL SYSTEM

DTC    C1441    Brake Booster Malfunction

for Preparation Click here


DESCRIPTION

If the brake booster is damaged and does not provide braking support when depressing the brake pedal, the skid control ECU determines that the brake booster has a problem and stores DTC C1441 (Brake Booster Malfunction).

DTC Code
DTC Detection Condition
Trouble Area
C1441
When the brake pedal load sensing switch and master cylinder pressure sensor are functioning normally and the brake pedal load sensing switch is judged as ON, the pressure signal from the master cylinder pressure sensor does not indicate an increase.
Brake booster assembly

INSPECTION PROCEDURE

1.INSPECT VACUUM SYSTEM
  1. Check the brake booster assembly (Click here).


NEXT

END