Home
›
DRIVE LINE
›
DIFFERENTIAL
›
REAR DIFFERENTIAL CARRIER ASSEMBLY
REAR DIFFERENTIAL CARRIER ASSEMBLY > REASSEMBLY > Preparation
SST
09223-00010
Cover & Seal Replacer
09330-00021
Companion Flange Holding Tool
09504-22011
Differential Side Bearing
Replacer
09506-30012
Differential Drive Pinion Rear
Bearing Cone Replacer
09550-00032
Replacer
09554-22010
Differential Oil Seal Replacer
09556-22010
Drive Pinion Front Bearing
Remover
09636-20010
Upper Ball Joint Dust Cover
Replacer
09950-30012
Puller A Set
(09951-03010)
Upper Plate
(09953-03010)
Center Bolt
(09954-03010)
Arm
(09955-03030)
Lower Plate 130
(09956-03020)
Adapter 18
09950-60010
Replacer Set
(09951-00620)
Replacer 62
09950-60020
Replacer Set No. 2
(09951-00710)
Replacer 71
09950-70010
Handle Set
(09951-07150)
Handle 150
(09951-07200)
Handle 200
EQUIPMENT
Torque wrench
Dial indicator
Micrometer
Vernier caliper
LUBRICANT
Item
Capacity
Classification
Differential oil
0.90 +/- 0.05 liters (0.95 +/- 0.05 US qts, 0.75 +/- 0.04 lmp.qts)
Hypoid gear oil API GL-5 Above -18°C (0°F) SAE 90 Below -18°C (0°F) SAE 80W or 80W-90
RECOMMENDED TOOLS
09010-3C100
Set, Hexagon Wrench
(09013-6C130)
Socket Hexagon
10mm
09011-12301
Socket Wrench 30 mm
09044-00020
"TORX" Socket E10
SSM
08826-00090
Seal Packing 1281,
THREE BOND 1281 or equivalent
(FIPG)