Bleeding work list
- Brake fluid (replacement)
- Front disc brake cylinder (removal, installation or replacement)
- Front brake flexible hose (removal, installation or replacement)
- Rear disc brake cylinder (removal, installation or replacement)
- Rear brake flexible hose (removal, installation or replacement)
| Select "Usual air bleeding" on the Techstream display.
|
Air bleeding (no part replacement)
| Select "Actuator has been removed" on the Techstream display.
|
- Brake master cylinder (removal, installation or replacement)
- Stroke Simulator (removal, installation or replacement)
| - Work to be performed before replacement
- Using the Techstream, perform accumulator zero down.
- Disconnect the 2 brake booster pump connectors.
- Select "Master Cylinder or Stroke Simulator has been removed" on the Techstream display.
|
Brake master cylinder reservoir (removal, installation or replacement)
| - Work to be performed before replacement
- Using the Techstream, perform accumulator zero down.
- Disconnect the 2 brake booster pump connectors.
- Work to be performed before air bleeding
- Using the Techstream, perform accumulator zero down.
- Select "Master Cylinder or Stroke Simulator has been removed" on the Techstream display.
|
- Brake actuator (removal, installation or replacement)
- Brake booster pump (removal, installation or replacement)
| - Work to be performed before replacement
- Using the Techstream, perform accumulator zero down.
- Disconnect the 2 brake booster pump connectors.
- Work to be performed before air bleeding
- Using the Techstream, perform accumulator zero down.
- Select "Actuator has been removed" on the Techstream display.
|