FRONT BRAKE > DISASSEMBLY |
| 1. REMOVE FRONT DISC BRAKE PAD |
![]() |
Remove the 2 anti-squeal springs.
![]() |
Remove the 2 brake pads from the front disc brake cylinder mounting.
| 2. REMOVE FRONT ANTI-SQUEAL SHIM |
Remove the 2 anti-squeal shims and the 2 pad wear indicators from the pads.
| 3. REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE |
![]() |
Remove the 4 front disc brake pad support plates from the front disc brake cylinder mounting.
| 4. REMOVE NO. 1 FRONT DISC BRAKE CYLINDER SLIDE PIN |
![]() |
Remove the No. 1 front disc brake cylinder slide pin from the front disc brake cylinder mounting.
| 5. REMOVE NO. 2 FRONT DISC BRAKE CYLINDER SLIDE PIN |
![]() |
Remove the No. 2 front disc brake cylinder slide pin from the front disc brake cylinder mounting.
| 6. REMOVE FRONT DISC BRAKE CYLINDER SLIDE BUSHING |
![]() |
Using a screwdriver, remove the front disc brake cylinder slide bushing from the No. 2 front disc brake cylinder slide pin.
| 7. REMOVE FRONT DISC BRAKE BUSHING DUST BOOT |
![]() |
Remove the 2 front disc brake bushing dust boots from the front disc brake cylinder mounting.
| 8. REMOVE FRONT DISC BRAKE CYLINDER MOUNTING |
![]() |
Remove the 2 bolts and front disc brake cylinder mounting from the steering knuckle.
| 9. REMOVE FRONT DISC BRAKE PISTON |
![]() |
Place a shop rag or a piece of cloth between the disc brake pistons and the disc brake cylinder assembly.
Using compressed air, remove one of the disc brake pistons from the disc brake cylinder assembly.
| 10. REMOVE CYLINDER BOOT |
![]() |
Using a screwdriver, remove the 2 cylinder boots.
| 11. REMOVE PISTON SEAL |
![]() |
Using a screwdriver, remove the 2 piston seals from the disc brake cylinder assembly.
| 12. REMOVE FRONT DISC BRAKE BLEEDER PLUG CAP |
| 13. REMOVE FRONT DISC BRAKE BLEEDER PLUG |
| 14. REMOVE FRONT DISC |
![]() |
Remove the front disc.