Home › HYBRID SYSTEM ยท P310 › HYBRID VEHICLE CONTROL › HYBRID CONTROL SYSTEM

HYBRID CONTROL SYSTEM > DEFINITION OF TERMS

for Preparation Click here



Terms
Definition
Monitor Description
Description of what the hybrid vehicle control ECU monitors and how it detects malfunctions (monitoring purpose and its details).
Related DTCs
A group of diagnostic trouble codes that are output by the hybrid vehicle control ECU based on the same malfunction detection logic.
Typical Enabling Condition
Preconditions that allow the hybrid vehicle control ECU to detect malfunctions.
With all preconditions satisfied, the hybrid vehicle control ECU sets DTCs when the monitored value(s) exceeds malfunction threshold(s).
Sequence of Operation
Order of monitor priority, applied if multiple sensors and components are involved in a single malfunction detection process.
Each sensor and component are monitored in turn and subsequent items are not monitored until the previous detection operation completes.
Required Sensors/Components
Sensors and components used by the hybrid vehicle control ECU to detect each malfunction.
Frequency of Operation
Number of times the hybrid vehicle control ECU checks for each malfunction during each driving cycle.
"Once per driving cycle" means that the hybrid vehicle control ECU only checks for malfunctions once during a single driving cycle.
"Continuous" means that the hybrid vehicle control ECU checks for malfunctions whenever enabling conditions are met.
Duration
Minimum time for which the hybrid vehicle control ECU must detect continuous deviation in monitored value(s) in order to set a DTC. Timing begins when typical enabling conditions are met.
Malfunction Thresholds
Value beyond which the hybrid vehicle control ECU determines malfunctions exist and sets DTCs.
MIL Operation
Timing of MIL illumination after a malfunction is detected.
"Immediate" means that the hybrid vehicle control ECU illuminates the MIL as soon as a malfunction is detected.
"2 driving cycle" means that the hybrid vehicle control ECU illuminates the MIL if the same malfunction is detected again during the next driving cycle.