Home › CRUISE CONTROL SYSTEM › CRUISE CONTROL › CRUISE CONTROL SYSTEM

CRUISE CONTROL SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK
  1. Connect the Techstream to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the Techstream on.

  4. Select the following menus: Powertrain / Cruise Control / Trouble Codes.

  5. Check the details of the DTC(s) (Click here).


DTC CLEAR
  1. Connect the Techstream to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the Techstream on.

  4. Select the following menus: Powertrain / Cruise Control / Trouble Codes.

  5. Clear the DTCs.