Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

NAVIGATION SYSTEM > Voice Guidance does not Function

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK NAVIGATION SETTING


    E120104E02
  1. Enter the "Menu" screen by pressing the "MENU" switch.

  1. Select "Volume".



    E120106
  1. Check that "OFF" is not selected.

    OK:
    "OFF" is not selected.



NG
TURN AUTO VOICE GUIDANCE "ON"
OK


2.CHECK NAVIGATION SETTING


    E120104E03
  1. Enter the "Menu" screen by pressing the "MENU" switch.

  1. Select "Setup".



    E120105E01
  1. Check that "Voice Guidance in All Modes" is not OFF.

    OK:
    Voice guidance in all modes is not OFF.



NG
TURN VOICE GUIDANCE IN ALL MODES "ON"
OK


3.CHECK NAVIGATION SETTING


    E120104E03
  1. Enter the "Menu" screen by pressing the "MENU" switch.

  1. Select "Setup".



    E120107
  1. Check that "Auto Voice Guidance" is not OFF.

    OK:
    Auto voice guidance is not OFF.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK


4.CHECK MAP DISC


    I100152E12
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks on the map disc.



NG
REPLACE MAP DISC
OK


5.CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Check that audio can be heard from the driver side speaker.

    OK:
    Audio can be heard.



NG
PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)