Home › BODY ELECTRICAL › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM

POWER DOOR LOCK CONTROL SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



READ DATA LIST

HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

  1. Connect the Techstream to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the Techstream on.

  4. Enter the following menus:
    Body Electrical / Main Body / Data List.

  5. Read the Data List according to the display on the Techstream.

    Main Body (Main Body ECU): 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    D Door Courtesy SW
    Driver side door courtesy light switch signal/ON or OFF
    ON: Driver side door is OPEN
    OFF: Driver side door is CLOSED
    -
    P Door Courtesy SW
    Front passenger side door courtesy light switch signal/ON or OFF
    ON: Front passenger side door is OPEN
    OFF: Front passenger side door is CLOSED
    -
    RR Door Courtesy SW
    Rear right door courtesy light switch signal/ON or OFF
    ON: Rear right door is OPEN
    OFF: Rear right door is CLOSED
    -
    RL Door Courtesy SW
    Rear left door courtesy light switch signal/ON or OFF
    ON: Rear left door is OPEN
    OFF: Rear left door is CLOSED
    -
    Back Door Courtesy SW
    Back door courtesy light switch signal/ON or OFF
    ON: Back door is OPEN
    OFF: Back door is CLOSED
    -
    D-Door Lock Pos SW
    Driver side door lock position switch signal/ON or OFF
    ON: Driver side door is unlocked
    OFF: Driver side door is locked
    -
    P-Door Lock Pos SW
    Front passenger side door lock position switch signal/ON or OFF
    ON: Front passenger side door is unlocked
    OFF: Front passenger side door is locked
    -
    Back Door Open
    Back door lock signal/Permit or Prohibit
    Permit: Back door is UNLOCK
    Prohib: Back door is LOCK
    -
    Door Lock SW-Lock
    Door control switch lock signal/ON or OFF
    ON: While door control switch is pushed to LOCK
    OFF: Door control switch is not pushed to LOCK
    -
    Door Lock SW-Unlock
    Door control switch unlock signal/ON or OFF
    ON: While door control switch is pushed to UNLOCK
    OFF: Door control switch is not pushed to UNLOCK
    -
    Door Key SW-Lock
    Driver door lock/unlock switch lock signal (key-linked lock switch)/ON or OFF
    ON: While driver side door key cylinder is turned to LOCK
    OFF: Driver side door key cylinder is not turned to LOCK
    -
    D Door Key SW-UL
    Driver door lock/unlock switch unlock signal (key-linked unlock switch)/ON or OFF
    ON: While driver side door key cylinder is turned to UNLOCK
    OFF: Driver side door key cylinder is not turned to UNLOCK
    -
    Back Door Open Handle SW
    Back door open handle signal/ON or OFF
    ON: Back door open handle switch is pushed
    OFF: Back door open handle switch is free
    -
    Unlock Key Twice
    Key-linked 2-step unlock function/ON or OFF
    Customized value displayed
    -
    Auto Lock
    Speed-sensitive automatic door lock function/ON or OFF
    Customized value displayed
    -
    Auto Lock/Shift
    Shift-linked automatic door lock function/ON or OFF
    Customized value displayed
    -
    Auto Unlock/Shift
    Shift-linked automatic door unlock function/ON or OFF
    Customized value displayed
    -
    All Unlock/Open-Close
    Driver door-linked automatic door unlock function/ON or OFF
    Customized value displayed
    -


PERFORM ACTIVE TEST

HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the Techstream to the DLC3.

  2. Turn the power switch on (IG).

  3. Turn the Techstream on.

  4. Enter the following menus:
    Body Electrical / Main Body / Active Test.

  5. Perform the Active Test according to the display on the Techstream.

    Main Body (Main Body ECU): 
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    Door Lock
    Door lock motor
    LOCK/UNLOCK/OFF
    -
    D-Door Unlock
    Driver door lock motor
    ON/OFF
    -
    Trunk and Back-Door Open
    Back door lock motor
    ON/OFF
    -