SMART KEY SYSTEM > SYSTEM DESCRIPTION |
| PUSH-BUTTON START FUNCTION DESCRIPTION |
The push-button start function uses a push-type power switch, which the driver can operate by merely carrying the electrical key. This system consists primarily of the main body ECU (instrument panel junction block), power switch, ID code box (immobiliser code ECU), steering lock ECU, electrical key, ACC relay, IG1 relay, IG2 relay and certification ECU (smart key ECU assembly). The main body ECU (instrument panel junction block) controls the function. This function operates in cooperation with the smart key system.
| FUNCTION OF COMPONENT |
| Component | Function |
Power Switch
|
|
| Electrical Key | Receives signals from oscillators and returns ID code to door control receiver. |
Indoor Oscillator
| Receives request signals from certification ECU (smart key ECU assembly) and forms detection area in vehicle interior. |
| Steering Lock ECU | Receives lock/unlock request signals from certification ECU (smart key ECU assembly) and main body ECU (instrument panel junction block). |
| Stop Light Switch | Outputs state of brake pedal to main body ECU (instrument panel junction block). |
| Door Control Receiver | Receives ID code from electrical key and transmits it to certification ECU (smart key ECU). |
| Main body ECU (instrument panel junction block) |
|
| Certification ECU (smart key ECU assembly) | Certifies ID code received from door control receiver and transmits certification results to ID code box (immobiliser code ECU) and steering lock ECU. |
| ID Code Box | Receives steering unlock or engine immobiliser unset signals from certification ECU (smart key ECU assembly), certifies them, and transmits each unset signal to steering lock ECU or hybrid vehicle control ECU. |
| Hybrid Vehicle Control ECU |
|
| SYSTEM FUNCTION |
| Control | Outline |
| Power switch control | When driver operates power switch with electrical key in driver's possession, certification ECU (smart key ECU assembly) starts indoor oscillator, which transmits request signal to electrical key. Upon receiving this signal, the electrical key transmits ID code matching result signal to main body ECU (instrument panel junction block). |
| Diagnosis | When main body ECU (instrument panel junction block) detects malfunction, main body ECU (instrument panel junction block) diagnoses and memorizes failed section. |
| CONSTRUCTION AND OPERATION |
![]() |
Power Switch
The power switch consists of a momentary type switch, 2 color (amber, green) LEDs, and a transponder key amplifier.
Indicator Light Condition
| Power Source Mode/Condition | Indicator Light Condition | |
| Brake pedal released | Brake pedal depressed, shift lever in P or N | |
| off | OFF | ON (Green) (When key and vehicle IDs match) |
| on (ACC, IG) | ON (Amber) | ON (Green) |
| on (READY) | OFF | OFF |
| Steering lock not unlocked | Flashes (Green) for 15 sec. | Flashes (Green) for 15 sec. |
| System malfunction | Flashes (Amber) for 15 sec. | Flashes (Amber) for 15 sec. |
Main body ECU (instrument panel junction block)
The main body ECU (instrument panel junction block) consists of the IG1 and IG2 relay actuation circuits and CPU.
| PUSH-BUTTON START FUNCTION OPERATION |
This system has different power source mode patterns depending on the brake pedal condition and shift lever position.
| Brake Pedal | Shift Lever | Power Source Mode Pattern |
| Depressed | P or N position | When the power switch is pushed once.
|
| Not depressed | P position | Each time the power switch is pushed.
|
| Except P position | Each time the power switch is pushed.
| |
| - | P position | When the power switch is pushed with power source mode on (READY).
|
| - | Except P position | When the power switch is pushed with power source mode on (READY).
|

| WHEN KEY BATTERY IS LOW |
To operate the push-button start function when the key battery is low, hold the key close to the power switch with the brake pedal depressed.

The main body ECU (instrument panel junction block) transmits a key verification request signal to the certification ECU (smart key ECU assembly).
The certification ECU (smart key ECU assembly) does not receive an ID code response from the door control receiver, so it actuates the transponder key amplifier built into the power switch.
The transponder key amplifier outputs an engine immobiliser radio wave to the key.
The key receives the radio wave, and returns a radio wave response to the transponder key amplifier.
The transponder key amplifier combines the key ID codes with the radio wave response, and transmits it to the certification ECU (smart key ECU assembly).
The certification ECU (smart key ECU assembly) judges and verifies the ID code, and transmits a key verification OK signal to the main body ECU (instrument panel junction block). The buzzer in the combination meter sounds at the same time.
After the buzzer sounds, if the power switch is pressed within 5 seconds with the brake pedal not depressed, the power source mode changes to on (ACC) or on (IG), the same as in the normal condition.
| DIAGNOSIS |