TIRE PRESSURE WARNING SYSTEM > REGISTRATION |
| 1. DESCRIPTION OF CODE REGISTRATION |
Before registration
When replacing the tire pressure warning ECU:
When replacing a tire pressure warning valve and transmitter:

| 2. REGISTER TRANSMITTER ID (USING TECHSTREAM) |
Set the air pressure of all tires to the specified value (Click here).
Turn the power switch off.
Connect the Techstream to the DLC3.
Turn the power switch on (IG) and turn the Techstream on.
Enter the menu items in this order: Chassis / Tire Pressure Monitor / Utility / ID Registration.
Perform the following procedures displayed on the screen.
Confirmation of transmitter ID registration.
Enter the menu items in this order: Chassis / Tire Pressure Monitor / Data List.
Read the "ID Tire Inflation Pressure" values.
Confirm that the data of tire pressure of all tires are displayed on the screen.