Home › ENGINE › 3MZ-FE COOLING › COOLING FAN MOTOR

COOLING FAN MOTOR > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK COOLING FAN MOTOR


    A159758E02
  1. Check that the motor turns smoothly when the battery is connected to the fan motor connector.

  1. Measure the current while the motor is turning.

    Standard current:
    17.0 to 23.0 A at 20°C (68°F)

    If the result is not as specified, replace the cooling fan motor.



2. CHECK NO. 2 COOLING FAN MOTOR


    A159758E02
  1. Check that the motor turns smoothly when the battery is connected to the fan motor connector.

  1. Measure the current while the motor is turning.

    Standard current:
    17.0 to 23.0 A at 20°C (68°F)

    If the result is not as specified, replace the No. 2 cooling fan motor.