Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › OCCUPANT CLASSIFICATION SYSTEM

OCCUPANT CLASSIFICATION SYSTEM > DTC CHECK / CLEAR

for Preparation Click here



DTC CHECK
  1. Turn the power switch off.

  2. Connect the Techstream to the DLC3.

  3. Turn the power switch on (IG) and turn the Techstream on.

  4. Enter the following menus: Body Electrical / Occupant Detection / Trouble Code

  5. Check the DTCs by following the prompts on the Techstream screen.

    HINT:
    Refer to the Techstream operator's manual for further details.


DTC CLEAR
  1. Turn the power switch off.

  2. Connect the Techstream to the DLC3.

  3. Turn the power switch on (IG) and turn the Techstream on.

  4. Enter the following menus: Body Electrical / Occupant Detection / Trouble Code

  5. Clear the DTCs by following the prompts on the Techstream screen.

    HINT:
    Refer to the Techstream operator's manual for further details.