Home › ENGINE › 3MZ-FE ENGINE MECHANICAL › CYLINDER HEAD

CYLINDER HEAD > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 STRAIGHT SCREW PLUG (for Bank 1)
  1. Remove the valve stem caps from the cylinder heads.

    HINT:
    Arrange the removed parts in the correct order.



2. REMOVE NO. 2 STRAIGHT SCREW PLUG (for Bank 2)
  1. Remove the valve stem caps from the cylinder heads.

    HINT:
    Arrange the removed parts in the correct order.



3. REMOVE VALVE LIFTER

HINT:
Store the lifters in the correct order so that they can be returned to the original locations when reassembling.



4. REMOVE INTAKE VALVE


    A005224E01
  1. Using SST, compress the valve spring and remove the 2 retainer locks, retainer, spring and valve.

    SST
    09202-70020   (09202-00010)

    HINT:
    Store the valves, valve springs and spring retainers in the correct order so that they can be returned to the original locations when reassembling.



5. REMOVE EXHAUST VALVE


    A051796E01
  1. Using SST, compress the valve spring and remove the 2 retainer locks, retainer, spring and valve.

    SST
    09202-70020   (09202-00010)

    HINT:
    Store the valves, valve springs and spring retainers in the correct order so that they can be returned to the original locations when reassembling.



6. REMOVE VALVE STEM OIL SEAL OR RING
  1. Using needle-nose pliers, remove the oil seals.



7. REMOVE VALVE SPRING SEAT
  1. Remove the valve spring seats from the cylinder head.



8. REMOVE SEMICIRCULAR PLUG
  1. Remove the semicircular plug from the cylinder head.



9. REMOVE RING PIN (for Bank 1)


10. REMOVE RING PIN (for Bank 2)


11. REMOVE STUD BOLTS