Home › RESTRAINTS › SEAT BELT › SEAT BELT WARNING SYSTEM

SEAT BELT WARNING SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



ACTIVE TEST
Performing the ACTIVE TEST using Techstream allows the meters, indicators and so on to operate without removing any parts. Performing the ACTIVE TEST as the first step in troubleshooting is one way to shorten labor time.
  1. Connect Techstream to the DLC3.

  2. Turn the power switch on (IG).

  3. From the display on the tester, select the "ACTIVE TEST".

    Combination Meter: 
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    Front Passenger Side Seat Belt
    Front passenger side seat belt warning light
    Front passenger side seat belt warning light is OFF / ON
    Confirm that the vehicle is stopped with the engine idling
    Driver Side Seat Belt
    Driver side seat belt warning light
    Driver side seat belt warning light is OFF / ON
    Confirm that the vehicle is stopped with the engine idling